[ 0.000000] Linux version 2.6.26-rc5-00016-g91cc75d (root@unix) (gcc version 4.2.3 (Debian 4.2.3-3)) #10 SMP Wed Jun 11 17:47:09 UTC 2008 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f0ea000 (usable) [ 0.000000] BIOS-e820: 000000003f0ea000 - 000000003f2eb000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003f2eb000 - 000000003febe000 (ACPI data) [ 0.000000] BIOS-e820: 000000003febe000 - 000000003feef000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003feef000 - 000000003ff00000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] 112MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 258282) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 258282 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 258282 [ 0.000000] On node 0 totalpages: 258282 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 226 pages used for memmap [ 0.000000] HighMem zone: 28680 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] Using APIC driver default [ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE ) [ 0.000000] ACPI: XSDT 3FEFD1C0, 0074 (r1 APPLE Apple00 A5 1000013) [ 0.000000] ACPI: FACP 3FEFB000, 00F4 (r3 APPLE Apple00 A5 Loki 5F) [ 0.000000] ACPI: DSDT 3FEF0000, 48D1 (r1 APPLE MacBookP 20002 INTL 20050309) [ 0.000000] ACPI: FACS 3FEC0000, 0040 [ 0.000000] ACPI: HPET 3FEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: APIC 3FEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: MCFG 3FEF8000, 003C (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: ASF! 3FEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: SBST 3FEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: ECDT 3FEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: SSDT 3FEEF000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309) [ 0.000000] ACPI: SSDT 3FEBD000, 064F (r1 SataRe SataPri 1000 INTL 20050309) [ 0.000000] ACPI: SSDT 3FEBC000, 069C (r1 SataRe SataSec 1000 INTL 20050309) [ 0.000000] ACPI: DMI detected: Apple [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 46760 bytes of per cpu data [ 0.000000] NR_CPUS: 2, nr_cpu_ids: 2 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256264 [ 0.000000] Kernel command line: root=/dev/sda1 ro quiet splash vga=773 selinux=1 audit=1 enforcing=1 debug acpi_osi=Linux pnpacpi=off pci=routeirq usbcore.autosuspend=1 nmi_watchdog=0 [ 0.000000] audit: enabled (after initialization) [ 0.000000] ACPI: Added _OSI(Linux) [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Detected 2161.429 MHz processor. [ 0.010000] Console: colour dummy device 80x25 [ 0.010000] console [tty0] enabled [ 0.010000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.010000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.010000] Memory: 1018712k/1033128k available (2556k kernel code, 13800k reserved, 1279k data, 328k init, 115624k highmem) [ 0.010000] virtual kernel memory layout: [ 0.010000] fixmap : 0xfff7e000 - 0xfffff000 ( 516 kB) [ 0.010000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.010000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 0.010000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.010000] .init : 0xc04c5000 - 0xc0517000 ( 328 kB) [ 0.010000] .data : 0xc037f06d - 0xc04bedac (1279 kB) [ 0.010000] .text : 0xc0100000 - 0xc037f06d (2556 kB) [ 0.010000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.010000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.010000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.010000] hpet clockevent registered [ 0.159747] Calibrating delay using timer specific routine.. 4327.95 BogoMIPS (lpj=21639774) [ 0.159837] Security Framework initialized [ 0.159849] SELinux: Initializing. [ 0.159872] SELinux: Starting in enforcing mode [ 0.159885] selinux_register_security: Registering secondary module capability [ 0.159897] Capability LSM initialized as secondary [ 0.159942] Mount-cache hash table entries: 512 [ 0.160000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.160000] CPU: L2 cache: 4096K [ 0.160000] CPU: Physical Processor ID: 0 [ 0.160000] CPU: Processor Core ID: 0 [ 0.160000] Intel machine check architecture supported. [ 0.160000] Intel machine check reporting enabled on CPU#0. [ 0.160000] using mwait in idle threads. [ 0.160000] Checking 'hlt' instruction... OK. [ 0.200000] ACPI: Core revision 20080321 [ 0.228302] ENABLING IO-APIC IRQs [ 0.228526] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.328513] CPU0: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06 [ 0.330000] Booting processor 1/1 ip 6000 [ 0.340000] Initializing CPU#1 [ 0.340000] Calibrating delay using timer specific routine.. 4322.58 BogoMIPS (lpj=21612913) [ 0.340000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.340000] CPU: L2 cache: 4096K [ 0.340000] CPU: Physical Processor ID: 0 [ 0.340000] CPU: Processor Core ID: 1 [ 0.340000] Intel machine check architecture supported. [ 0.340000] Intel machine check reporting enabled on CPU#1. [ 0.490000] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06 [ 0.490000] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.490038] Brought up 2 CPUs [ 0.490047] Total of 2 processors activated (8650.53 BogoMIPS). [ 0.490082] CPU0 attaching sched-domain: [ 0.490092] domain 0: span 0-1 [ 0.490099] groups: 0 1 [ 0.490115] CPU1 attaching sched-domain: [ 0.490124] domain 0: span 0-1 [ 0.490132] groups: 1 0 [ 0.500000] net_namespace: 516 bytes [ 0.500000] Booting paravirtualized kernel on bare hardware [ 0.500000] NET: Registered protocol family 16 [ 0.500000] No dock devices found. [ 0.500000] EISA bus registered [ 0.500000] ACPI: bus type pci registered [ 0.500000] PCI: Using configuration type 1 for base access [ 0.500000] Setting up standard PCI resources [ 0.510000] ACPI: EC: EC description table is found, configuring boot EC [ 0.510000] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.530000] ACPI: BIOS _OSI(Linux) query honored via cmdline [ 0.531624] ACPI: Interpreter enabled [ 0.531635] ACPI: (supports S0 S3 S4 S5) [ 0.531760] ACPI: Using IOAPIC for interrupt routing [ 0.580000] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.580000] ACPI: EC: driver started in interrupt mode [ 0.580000] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.580000] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.580000] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO [ 0.580000] PCI: Transparent bridge - 0000:00:1e.0 [ 0.580000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.580000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 0.580000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.581001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.581991] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.585505] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.632479] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.632479] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.632479] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.632479] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.632479] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.632479] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.632479] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.632479] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) [ 0.632479] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.632479] pnp: PnP ACPI: disabled [ 0.632480] SCSI subsystem initialized [ 0.632480] libata version 3.00 loaded. [ 0.632480] usbcore: registered new interface driver usbfs [ 0.632480] usbcore: registered new interface driver hub [ 0.632480] usbcore: registered new device driver usb [ 0.642479] PCI: Using ACPI for IRQ routing [ 0.642479] PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified [ 0.642479] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.642479] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.642479] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 0.642479] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 0.642479] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 0.642479] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 0.642479] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 0.642479] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 0.642479] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 0.642479] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 0.642479] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 0.642479] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 0.642479] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 0.642479] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19 [ 0.642479] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.642479] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.642479] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 0.642479] ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 0.662242] NetLabel: Initializing [ 0.662251] NetLabel: domain hash size = 128 [ 0.662258] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.662402] NetLabel: unlabeled traffic allowed by default [ 0.662421] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.662436] hpet0: 3 64-bit timers, 14318180 Hz [ 0.671096] Switched to high resolution mode on CPU 0 [ 0.673809] Switched to high resolution mode on CPU 1 [ 0.714955] PCI: Bridge: 0000:00:01.0 [ 0.714955] IO window: 3000-3fff [ 0.714955] MEM window: 0x50300000-0x503fffff [ 0.714955] PREFETCH window: 0x0000000040000000-0x0000000047ffffff [ 0.714955] PCI: Bridge: 0000:00:1c.0 [ 0.714955] IO window: 2000-2fff [ 0.714955] MEM window: 0x50200000-0x502fffff [ 0.714955] PREFETCH window: 0x0000000050500000-0x00000000505fffff [ 0.714955] PCI: Bridge: 0000:00:1c.1 [ 0.714955] IO window: disabled. [ 0.714955] MEM window: 0x50100000-0x501fffff [ 0.714955] PREFETCH window: disabled. [ 0.714955] PCI: Bridge: 0000:00:1c.2 [ 0.714955] IO window: 1000-1fff [ 0.714955] MEM window: 0x4c100000-0x500fffff [ 0.714955] PREFETCH window: 0x0000000048000000-0x000000004bffffff [ 0.714955] PCI: Bridge: 0000:00:1e.0 [ 0.714955] IO window: disabled. [ 0.714955] MEM window: 0x4c000000-0x4c0fffff [ 0.714955] PREFETCH window: disabled. [ 0.714955] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.714955] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 0.714955] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 0.714955] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.714955] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 0.714955] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.714955] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 0.714955] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 0.714955] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.714955] NET: Registered protocol family 2 [ 0.745100] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.745640] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.746371] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes) [ 0.747348] TCP: Hash tables configured (established 131072 bind 65536) [ 0.747359] TCP reno registered [ 0.755200] NET: Registered protocol family 1 [ 0.774957] IA-32 Microcode Update Driver: v1.14a [ 0.774957] Initializing RT-Tester: OK [ 0.774957] audit: initializing netlink socket (enabled) [ 0.774957] type=2000 audit(1213222638.751:1): initialized [ 0.784957] highmem bounce pool size: 64 pages [ 0.784957] Total HugeTLB memory allocated, 0 [ 0.834458] fuse init (API version 7.9) [ 0.834653] msgmni has been set to 1764 for ipc namespace c0498e80 [ 0.834653] SELinux: Registering netfilter hooks [ 0.834653] io scheduler noop registered [ 0.834669] io scheduler cfq registered (default) [ 0.834865] pci 0000:01:00.0: Boot video device [ 0.844458] vesafb: framebuffer at 0x40000000, mapped to 0xf8880000, using 1536k, total 16384k [ 0.844458] vesafb: mode is 1024x768x8, linelength=1024, pages=18 [ 0.844458] vesafb: protected mode interface info at c000:ad0c [ 0.844458] vesafb: pmi: set display start = c00cad94, set palette = c00cae50 [ 0.844458] vesafb: scrolling: redraw [ 0.844458] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 [ 0.861454] Console: switching to colour frame buffer device 128x48 [ 0.874456] fb0: VESA VGA frame buffer device [ 0.874456] power_supply ADP1: uevent [ 0.874456] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 [ 0.874456] power_supply ADP1: Static prop TYPE=Mains [ 0.874456] power_supply ADP1: 1 dynamic props [ 0.874456] power_supply ADP1: prop ONLINE=1 [ 0.874456] power_supply ADP1: power_supply_changed [ 0.874456] ACPI: AC Adapter [ADP1] (on-line) [ 0.874456] power_supply ADP1: power_supply_changed_work [ 0.874456] power_supply ADP1: power_supply_update_gen_leds 1 [ 0.874456] power_supply ADP1: uevent [ 0.874456] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 [ 0.874456] power_supply ADP1: Static prop TYPE=Mains [ 0.874456] power_supply ADP1: 1 dynamic props [ 0.874456] power_supply ADP1: prop ONLINE=1 [ 0.884436] ACPI: Battery Slot [BAT0] (battery absent) [ 0.904437] hpet_resources: 0xfed00000 is busy [ 0.914437] loop: module loaded [ 0.914437] Linux video capture interface: v2.00 [ 0.926107] input: Macintosh mouse button emulation as /class/input/input0 [ 0.926107] Driver 'sd' needs updating - please use bus_type methods [ 0.937583] Driver 'sr' needs updating - please use bus_type methods [ 0.942313] ata_piix 0000:00:1f.1: version 2.12 [ 0.947320] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 0.952555] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 0.963684] scsi0 : ata_piix [ 0.970313] scsi1 : ata_piix [ 0.970313] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14 [ 0.975519] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15 [ 1.158436] ata1.00: ATAPI: MATSHITADVD-R UJ-857D, KCV9, max UDMA/66 [ 1.198356] ata1.00: configured for UDMA/66 [ 1.369182] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-857D KCV9 PQ: 0 ANSI: 5 [ 1.369182] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 1.369182] Uniform CD-ROM driver Revision: 3.20 [ 1.401747] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.401747] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.406936] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 1.412133] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ] [ 1.568074] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 1.578046] scsi2 : ata_piix [ 1.588587] scsi3 : ata_piix [ 1.590062] ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19 [ 1.598048] ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19 [ 1.780048] ata3.01: ATA-8: FUJITSU MHW2120BH, 00810013, max UDMA/100 [ 1.785157] ata3.01: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.857761] ata3.01: configured for UDMA/100 [ 2.036917] scsi 2:0:1:0: Direct-Access ATA FUJITSU MHW2120B 0081 PQ: 0 ANSI: 5 [ 2.036917] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 2.051848] sd 2:0:1:0: [sda] Write Protect is off [ 2.057498] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 2.063191] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.069119] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 2.078946] sd 2:0:1:0: [sda] Write Protect is off [ 2.080888] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 2.090883] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.097022] sda: sda1 sda2 < sda5 > [ 2.109569] sd 2:0:1:0: [sda] Attached SCSI disk [ 2.115797] sd 2:0:1:0: Attached scsi generic sg1 type 0 [ 2.126804] usbcore: registered new interface driver usblcd [ 2.133368] usbcore: registered new interface driver usbled [ 2.133368] PNP: No PS/2 controller found. Probing ports directly. [ 2.148353] i8042.c: No controller found. [ 2.169851] mice: PS/2 mouse device common for all mice [ 2.169851] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com [ 2.186072] EDAC MC: Ver: 2.1.0 Jun 5 2008 [ 2.200286] cpuidle: using governor ladder [ 2.200286] cpuidle: using governor menu [ 2.212846] usbcore: registered new interface driver hiddev [ 2.223629] usbcore: registered new interface driver usbhid [ 2.223629] usbhid: v2.6:USB HID core driver [ 2.235931] Advanced Linux Sound Architecture Driver Version 1.0.16. [ 2.235931] ALSA device list: [ 2.245928] No soundcards found. [ 2.258385] oprofile: using NMI interrupt. [ 2.258385] IPVS: Registered protocols (TCP, AH, ESP) [ 2.275478] IPVS: Connection hash table configured (size=4096, memory=32Kbytes) [ 2.279244] IPVS: ipvs loaded. [ 2.285572] Initializing XFRM netlink socket [ 2.293192] NET: Registered protocol family 17 [ 2.299154] NET: Registered protocol family 15 [ 2.304964] Using IPI No-Shortcut mode [ 2.326793] kjournald starting. Commit interval 5 seconds [ 2.316800] EXT3-fs: mounted filesystem with ordered data mode. [ 2.316800] VFS: Mounted root (ext3 filesystem) readonly. [ 2.316800] Freeing unused kernel memory: 328k freed [ 3.185790] SELinux: 8192 avtab hash slots, 205740 rules. [ 3.471154] SELinux: 8192 avtab hash slots, 205740 rules. [ 3.831003] SELinux: 7 users, 7 roles, 3017 types, 90 bools [ 3.836760] SELinux: 72 classes, 205740 rules [ 3.854861] SELinux: Completing initialization. [ 3.861002] SELinux: Setting up existing superblocks. [ 3.884233] SELinux: initialized (dev sda1, type ext3), uses xattr [ 3.894234] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts [ 3.894234] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 4.021550] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts [ 4.027188] SELinux: initialized (dev devpts, type devpts), uses transition SIDs [ 4.032805] SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts [ 4.038328] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 4.043891] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts [ 4.053886] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs [ 4.061002] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts [ 4.066770] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs [ 4.072401] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 4.078095] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts [ 4.083676] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts [ 4.089197] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 4.135880] SELinux: policy loaded with handle_unknown=deny [ 4.143602] type=1403 audit(1213222641.930:2): policy loaded auid=4294967295 ses=4294967295 [ 5.246953] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 5.266953] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 10.726228] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 11.044001] power_supply ADP1: uevent [ 11.055995] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 [ 11.062117] power_supply ADP1: Static prop TYPE=Mains [ 11.070834] power_supply ADP1: 1 dynamic props [ 11.076578] power_supply ADP1: prop ONLINE=1 [ 13.398174] input: Power Button (FF) as /class/input/input1 [ 13.469303] ACPI: Power Button (FF) [PWRF] [ 13.477909] ACPI: SSDT 3FEB8C10, 02AE (r1 APPLE Cpu0Ist 3000 INTL 20050309) [ 13.485448] ACPI: SSDT 3FEB8910, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20050309) [ 13.495875] Monitor-Mwait will be used to enter C-1 state [ 13.501789] Monitor-Mwait will be used to enter C-2 state [ 13.507598] Monitor-Mwait will be used to enter C-3 state [ 13.515268] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 13.520587] ACPI: ACPI0007:00 is registered as cooling_device0 [ 13.526296] ACPI: Processor [CPU0] (supports 8 throttling states) [ 13.532370] input: Lid Switch as /class/input/input2 [ 13.538327] ACPI: Lid Switch [LID0] [ 13.544961] input: Power Button (CM) as /class/input/input3 [ 13.555267] ACPI: SSDT 3FEB8F10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309) [ 13.562560] ACPI: SSDT 3FEB7F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309) [ 13.575267] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 13.581362] ACPI: ACPI0007:01 is registered as cooling_device1 [ 13.581379] ACPI: Processor [CPU1] (supports 8 throttling states) [ 13.624814] ACPI: Power Button (CM) [PWRB] [ 13.635267] input: Sleep Button (CM) as /class/input/input4 [ 13.688515] ACPI: Sleep Button (CM) [SLPB] [ 13.748608] input: Video Bus as /class/input/input5 [ 13.802226] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 13.964490] USB Universal Host Controller Interface driver v3.0 [ 13.967601] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 13.977351] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 13.983689] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 13.986340] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts [ 13.996149] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 14.002593] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080 [ 14.005747] usb usb1: configuration #1 chosen from 1 choice [ 14.015573] hub 1-0:1.0: USB hub found [ 14.021589] hub 1-0:1.0: 2 ports detected [ 14.094943] Marking TSC unstable due to: TSC halts in idle. [ 14.137077] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 14.143174] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 14.149164] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 14.159155] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 14.161469] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060 [ 14.171754] usb usb2: configuration #1 chosen from 1 choice [ 14.178020] hub 2-0:1.0: USB hub found [ 14.180544] hub 2-0:1.0: 2 ports detected [ 14.307200] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 14.311677] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 14.315210] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 14.325049] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 14.328092] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040 [ 14.338363] usb usb3: configuration #1 chosen from 1 choice [ 14.344930] hub 3-0:1.0: USB hub found [ 14.347859] hub 3-0:1.0: 2 ports detected [ 14.426955] ath_hal: module license 'Proprietary' taints kernel. [ 14.437452] ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133) [ 14.464036] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 14.473307] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 14.485101] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 14.494998] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 14.498837] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020 [ 14.509114] usb usb4: configuration #1 chosen from 1 choice [ 14.515874] hub 4-0:1.0: USB hub found [ 14.519724] hub 4-0:1.0: 2 ports detected [ 14.529750] usb 1-2: new full speed USB device using uhci_hcd and address 2 [ 14.689101] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 14.694087] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 14.704418] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 14.714410] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 14.728248] ehci_hcd 0000:00:1d.7: debug port 1 [ 14.738264] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 14.745030] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x50405400 [ 14.771905] usb 1-2: unable to read config index 0 descriptor/start: -71 [ 14.778793] usb 1-2: chopping to 0 config(s) [ 14.778844] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 14.788473] usb usb5: configuration #1 chosen from 1 choice [ 14.795357] hub 5-0:1.0: USB hub found [ 14.799513] hub 5-0:1.0: 8 ports detected [ 14.816382] usb 1-2: string descriptor 0 read error: -71 [ 14.833306] usb 1-2: string descriptor 0 read error: -71 [ 14.833306] usb 1-2: no configuration chosen from 0 choices [ 14.875803] wlan: svn r3692 [ 14.926321] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 14.930119] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 14.945766] ath_pci: svn r3692 [ 15.023327] hda_codec: STAC922x, Apple subsys_id=106b1e00 [ 15.101832] ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 15.158037] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[4c004000-4c0047ff] Max Packet=[4096] IR/IT contexts=[4/8] [ 15.196805] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 15.200410] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 15.336804] MadWifi: ath_attach: HAL managed transmit power control (TPC) disabled. [ 15.344004] MadWifi: ath_attach: Interference mitigation is supported. Currently disabled. [ 15.355610] MadWifi: ath_attach: Switching rfkill capability off. [ 15.496471] ath_rate_sample: 1.2 (svn r3692) [ 15.780721] wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 15.787523] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 15.797463] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 15.802703] wifi0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 15.812704] wifi0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 15.820288] wifi0: H/W encryption support: WEP AES AES_CCM TKIP [ 15.827717] wifi0: Atheros AR5418 chip found (MAC 12.10, PHY SChip 8.1, Radio 12.0) [ 15.832388] wifi0: Use hw queue 1 for WME_AC_BE traffic [ 15.842390] wifi0: Use hw queue 0 for WME_AC_BK traffic [ 15.849696] wifi0: Use hw queue 2 for WME_AC_VI traffic [ 15.853930] wifi0: Use hw queue 3 for WME_AC_VO traffic [ 15.863931] wifi0: Use hw queue 4 for XR traffic [ 15.870929] wifi0: Use hw queue 7 for UAPSD traffic [ 15.877706] wifi0: Use hw queue 8 for CAB traffic [ 15.884366] wifi0: Use hw queue 9 for beacons [ 16.029414] usb 5-4: new high speed USB device using ehci_hcd and address 3 [ 16.129566] ath_pci: wifi0: Atheros 5418: mem=0x50100000, irq=17 [ 16.182120] usb 5-4: configuration #1 chosen from 1 choice [ 16.504490] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0019e3fffe2ad87e] [ 16.739204] usb 1-2: USB disconnect, address 2 [ 17.025349] usb 1-2: new full speed USB device using uhci_hcd and address 3 [ 17.175932] Clocksource tsc unstable (delta = -144725830 ns) [ 17.236242] usb 1-2: configuration #1 chosen from 1 choice [ 17.248620] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input6 [ 17.292813] input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2 [ 17.310346] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input7 [ 17.330269] input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2 [ 17.639285] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 17.835576] usb 3-2: configuration #1 chosen from 1 choice [ 17.859062] hiddev0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2 [ 18.150145] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 18.354409] usb 4-1: configuration #1 chosen from 1 choice [ 18.386840] input: HID 05ac:1000 as /class/input/input8 [ 18.413314] input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1 [ 18.442752] input: HID 05ac:1000 as /class/input/input9 [ 18.462962] input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1 [ 18.478073] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501) [ 18.488689] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26). [ 18.493065] input: Built-in iSight as /class/input/input10 [ 18.581268] usbcore: registered new interface driver uvcvideo [ 18.581268] USB Video Class driver (SVN r212) [ 18.601277] appletouch: Geyser mode initialized. [ 18.601277] input: appletouch as /class/input/input11 [ 18.734313] usbcore: registered new interface driver appletouch [ 19.484692] usb 5-4: USB disconnect, address 3 [ 19.550350] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 19.766717] applesmc: Apple MacBook Pro detected: [ 19.773268] applesmc: - Model with accelerometer [ 19.790175] applesmc: - Model with light sensors and backlight [ 19.790181] applesmc: - Model with 12 temperature sensors [ 19.806753] applesmc: device has already been initialized (0xe0, 0x00). [ 19.814072] applesmc: device successfully initialized. [ 19.821625] applesmc: 2 fans found. [ 19.835999] input: applesmc as /class/input/input12 [ 19.904679] Registered led device: smc::kbd_backlight [ 19.905568] applesmc: driver successfully loaded. [ 19.968852] Linux agpgart interface v0.103 [ 20.049253] Symbol init_mm is marked as UNUSED, however this module is using it. [ 20.054176] This symbol will go away in the future. [ 20.064762] Please evalute if this is the right api to use and if it really is, submit a report the linux kernel mailinglist together with submitting your code for inclusion. [ 20.131753] [fglrx] Maximum main memory to use for locked dma buffers: 913 MBytes. [ 20.139819] [fglrx] ASYNCIO init succeed! [ 20.147521] [fglrx] PAT is enabled successfully! [ 20.158437] [fglrx] module loaded - fglrx 8.47.3 [Mar 29 2008] on minor 0 [ 20.565271] ip_tables: (C) 2000-2006 Netfilter Core Team [ 20.702430] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 20.774021] arp_tables: (C) 2002 David S. Miller [ 20.872065] ieee80211_crypt: registered algorithm 'NULL' [ 20.893257] ieee80211_crypt: registered algorithm 'TKIP' [ 21.019075] usbcore: registered new interface driver isight_firmware [ 21.080819] ipmi message handler version 39.2 [ 21.105318] IPMI Watchdog: driver initialized [ 21.365194] Adding 2988048k swap on /dev/disk/by-uuid/c58cdc7c-b94b-4116-9cca-bf154269e4d8. Priority:-1 extents:1 across:2988048k [ 21.559651] usb 5-4: new high speed USB device using ehci_hcd and address 6 [ 21.569384] EXT3 FS on sda1, internal journal [ 21.755206] usb 5-4: configuration #1 chosen from 1 choice [ 21.755206] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501) [ 21.756186] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26). [ 21.773143] input: Built-in iSight as /class/input/input13 [ 26.284932] appletouch: incomplete data package (first byte: 2, length: 4). [ 28.579747] input: Pommed beeper device as /class/input/input14 [ 28.887272] Bluetooth: Core ver 2.11 [ 28.906979] NET: Registered protocol family 31 [ 28.906979] Bluetooth: HCI device and connection manager initialized [ 28.906979] Bluetooth: HCI socket layer initialized [ 28.978585] Bluetooth: L2CAP ver 2.9 [ 28.978585] Bluetooth: L2CAP socket layer initialized [ 29.054198] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 29.090302] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84 [ 29.145123] Bluetooth: RFCOMM socket layer initialized [ 29.145123] Bluetooth: RFCOMM TTY layer initialized [ 29.145123] Bluetooth: RFCOMM ver 1.8 [ 29.433426] usb 4-1: USB disconnect, address 2 [ 29.800888] usb 4-1: new full speed USB device using uhci_hcd and address 3 [ 30.025351] usb 4-1: configuration #1 chosen from 1 choice [ 30.207665] Bluetooth: HCI USB driver ver 2.9 [ 30.220350] usbcore: registered new interface driver hci_usb [ 32.623897] CPA self-test: [ 32.623955] 4k 0 large 224 gb 0 x 224[c0000000-f7c00000] miss 0 [ 32.653843] 4k 194560 large 34 gb 0 x 194594[c0000000-f7fff000] miss 0 [ 32.673792] 4k 194560 large 34 gb 0 x 194594[c0000000-f7fff000] miss 0 [ 32.673800] ok. [ 36.839696] input: Apple Computer, Inc. Mighty Mouse as /class/input/input15 [ 43.802050] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 47.017219] [fglrx] Reserve Block - 0 offset = 0X7ffb000 length = 0X5000 [ 47.017219] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X1000000 [ 47.017219] [fglrx] Reserve Block - 2 offset = 0X7fbb000 length = 0X40000 [ 47.370551] [fglrx] interrupt source 20008000 successfully enabled [ 47.370551] [fglrx] enable ID = 0x00000008 [ 47.370551] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000 [ 47.370551] [fglrx] interrupt source 10000000 successfully enabled [ 47.370551] [fglrx] enable ID = 0x00000009 [ 47.370551] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000 [ 254.300757] type=1400 audit(1213222882.793:3): avc: denied { write } for pid=3430 comm="gmplayer" name=".dvdcss" dev=sda1 ino=3214304 scontext=a-12:user_r:user_mplayer_t tcontext=a-12:object_r:sysadm_home_t tclass=dir [ 254.300825] type=1300 audit(1213222882.793:3): arch=40000003 syscall=39 success=no exit=-13 a0=8ba5518 a1=1ed a2=8ba5518 a3=31 items=0 ppid=3310 pid=3430 auid=4294967295 uid=1000 gid=1000 euid=1000 suid=1000 fsuid=1000 egid=1000 sgid=1000 fsgid=1000 tty=pts2 ses=4294967295 comm="gmplayer" exe="/usr/bin/mplayer" subj=a-12:user_r:user_mplayer_t key=(null) [ 296.491411] PM: Syncing filesystems ... done. [ 297.491850] Freezing user space processes ... (elapsed 0.08 seconds) done. [ 297.581852] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 297.581990] Suspending console(s) [ 297.667701] sd 2:0:1:0: [sda] Synchronizing SCSI cache [ 297.667951] sd 2:0:1:0: [sda] Stopping disk [ 297.790039] ACPI: PCI interrupt for device 0000:03:00.0 disabled [ 297.807006] [fglrx] firegl_gps_setpowerdown . [ 297.837711] ACPI: PCI interrupt for device 0000:01:00.0 disabled [ 297.845605] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 297.885630] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 297.885630] ACPI: PCI interrupt for device 0000:00:1d.7 disabled [ 297.915156] ACPI: PCI interrupt for device 0000:00:1d.3 disabled [ 297.915204] ACPI: PCI interrupt for device 0000:00:1d.2 disabled [ 297.915251] ACPI: PCI interrupt for device 0000:00:1d.1 disabled [ 297.915299] ACPI: PCI interrupt for device 0000:00:1d.0 disabled [ 297.925279] ACPI: PCI interrupt for device 0000:00:1b.0 disabled [ 298.117353] ACPI: Preparing to enter system sleep state S3 [ 298.217470] Disabling non-boot CPUs ... [ 298.217494] CPU0 attaching NULL sched-domain. [ 298.217499] CPU1 attaching NULL sched-domain. [ 298.337259] CPU 1 is now offline [ 298.337263] SMP alternatives: switching to UP code [ 298.358532] CPU0 attaching NULL sched-domain. [ 298.359194] CPU1 is down [ 298.359299] Extended CMOS year: 2000 [ 298.359299] Intel machine check architecture supported. [ 298.359305] Intel machine check reporting enabled on CPU#0. [ 298.359367] Back to C! [ 298.359657] Extended CMOS year: 2000 [ 298.359753] Enabling non-boot CPUs ... [ 298.359970] CPU0 attaching NULL sched-domain. [ 298.360205] SMP alternatives: switching to SMP code [ 298.371154] Booting processor 1/1 ip 6000 [ 298.377561] Initializing CPU#1 [ 298.517321] Calibrating delay using timer specific routine.. 4322.56 BogoMIPS (lpj=21612806) [ 298.517321] CPU: L1 I cache: 32K, L1 D cache: 32K [ 298.517321] CPU: L2 cache: 4096K [ 298.517321] CPU: Physical Processor ID: 0 [ 298.517321] CPU: Processor Core ID: 1 [ 298.517321] Intel machine check architecture supported. [ 298.517321] Intel machine check reporting enabled on CPU#1. [ 298.527991] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06 [ 298.528034] CPU0 attaching sched-domain: [ 298.528037] domain 0: span 0-1 [ 298.528038] groups: 0 1 [ 298.528044] CPU1 attaching sched-domain: [ 298.528046] domain 0: span 0-1 [ 298.528047] groups: 1 0 [ 298.517321] Switched to high resolution mode on CPU 1 [ 298.517321] CPU1 is up [ 299.312134] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 299.336850] PM: Writing back config space on device 0000:00:01.0 at offset f (was 80100, writing 8010b) [ 299.336850] PM: Writing back config space on device 0000:00:01.0 at offset a (was f, writing 0) [ 299.336850] PM: Writing back config space on device 0000:00:01.0 at offset 9 (was 1fff1, writing 47f14001) [ 299.336850] PM: Writing back config space on device 0000:00:01.0 at offset 8 (was fff0, writing 50305030) [ 299.336850] PM: Writing back config space on device 0000:00:01.0 at offset 7 (was f0, writing 3030) [ 299.336850] PM: Writing back config space on device 0000:00:01.0 at offset 6 (was 0, writing 10100) [ 299.336850] PM: Writing back config space on device 0000:00:01.0 at offset 3 (was 10000, writing 10040) [ 299.336850] PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100000, writing 100007) [ 299.336850] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 299.336850] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 299.336850] PM: Writing back config space on device 0000:00:07.0 at offset f (was 100, writing 10b) [ 299.336850] PM: Writing back config space on device 0000:00:07.0 at offset 4 (was 0, writing 50404000) [ 299.336850] PM: Writing back config space on device 0000:00:07.0 at offset 1 (was b00000, writing b00002) [ 299.348774] PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 10a) [ 299.348802] PM: Writing back config space on device 0000:00:1b.0 at offset 4 (was 4, writing 50400004) [ 299.349371] PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 40) [ 299.349382] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100002) [ 299.349415] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 299.349426] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 299.529333] PM: Writing back config space on device 0000:00:1c.0 at offset 9 (was 10001, writing 50515051) [ 299.529343] PM: Writing back config space on device 0000:00:1c.0 at offset 8 (was 0, writing 50205020) [ 299.529352] PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was 20000000, writing 2020) [ 299.529366] PM: Writing back config space on device 0000:00:1c.0 at offset 3 (was 810000, writing 810040) [ 299.529377] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100000, writing 100007) [ 299.529437] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 299.529446] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 299.529481] PM: Writing back config space on device 0000:00:1c.1 at offset 9 (was 10001, writing 1fff1) [ 299.529489] PM: Writing back config space on device 0000:00:1c.1 at offset 8 (was 0, writing 50105010) [ 299.529498] PM: Writing back config space on device 0000:00:1c.1 at offset 7 (was 20000000, writing 200000f0) [ 299.529512] PM: Writing back config space on device 0000:00:1c.1 at offset 3 (was 810000, writing 810040) [ 299.529523] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100000, writing 100007) [ 299.529581] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 299.529590] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 299.529624] PM: Writing back config space on device 0000:00:1c.2 at offset 9 (was 10001, writing 4bf14801) [ 299.529633] PM: Writing back config space on device 0000:00:1c.2 at offset 8 (was 0, writing 50004c10) [ 299.529642] PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20000000, writing 1010) [ 299.529656] PM: Writing back config space on device 0000:00:1c.2 at offset 3 (was 810000, writing 810040) [ 299.529667] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100000, writing 100007) [ 299.529724] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 299.529733] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 299.529745] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 299.529756] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 299.529822] usb usb1: root hub lost power or was reset [ 299.529861] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 299.529872] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 299.529936] usb usb2: root hub lost power or was reset [ 299.529959] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 299.529970] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 299.530034] usb usb3: root hub lost power or was reset [ 299.530068] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 299.530079] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 299.530142] usb usb4: root hub lost power or was reset [ 299.548488] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 299.548499] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 299.548586] PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 10001, writing 1fff1) [ 299.548595] PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 0, writing 4c004c00) [ 299.548604] PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was 22800000, writing 228000f0) [ 299.548622] PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100000, writing 100007) [ 299.548652] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 299.548725] PM: Writing back config space on device 0000:00:1f.1 at offset f (was 100, writing 10b) [ 299.548758] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800001, writing 2800005) [ 299.548775] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 299.548784] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 299.568429] PM: Writing back config space on device 0000:00:1f.2 at offset f (was 200, writing 20b) [ 299.568464] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00003, writing 2b00007) [ 299.568490] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 299.568500] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 299.575510] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 299.575523] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 299.587145] [fglrx] firegl_gps_setpowerup . [ 299.587145] PM: Writing back config space on device 0000:02:00.0 at offset f (was 100, writing 10b) [ 299.587145] PM: Writing back config space on device 0000:02:00.0 at offset c (was 0, writing fffe0000) [ 299.587145] PM: Writing back config space on device 0000:02:00.0 at offset 6 (was 1, writing 2001) [ 299.587145] PM: Writing back config space on device 0000:02:00.0 at offset 4 (was 4, writing 50200004) [ 299.587145] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 40) [ 299.587145] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 40100000, writing 100007) [ 299.599903] PM: Writing back config space on device 0000:03:00.0 at offset f (was 1ff, writing 10a) [ 299.603144] PM: Writing back config space on device 0000:03:00.0 at offset 4 (was 4, writing 50100004) [ 299.603154] PM: Writing back config space on device 0000:03:00.0 at offset 3 (was 0, writing 40) [ 299.603167] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100000, writing 100007) [ 299.603214] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 299.603225] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 299.623913] PM: Writing back config space on device 0000:0c:03.0 at offset 5 (was 0, writing 4c000000) [ 299.623923] PM: Writing back config space on device 0000:0c:03.0 at offset 4 (was 0, writing 4c004000) [ 299.623933] PM: Writing back config space on device 0000:0c:03.0 at offset 3 (was 0, writing f810) [ 299.628015] PM: Writing back config space on device 0000:0c:03.0 at offset 1 (was 2100000, writing 2100016) [ 299.685224] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[4c004000-4c0047ff] Max Packet=[4096] IR/IT contexts=[4/8] [ 299.685224] sd 2:0:1:0: [sda] Starting disk [ 299.741785] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out [ 299.741790] ata1.00: ACPI cmd ef/03:44:00:00:00:a0 filtered out [ 299.781582] ata1.00: configured for UDMA/66 [ 300.312741] ata3.01: ACPI cmd ef/03:0c:00:00:00:b0 filtered out [ 300.312747] ata3.01: ACPI cmd ef/03:45:00:00:00:b0 filtered out [ 300.429686] ata3.01: configured for UDMA/100 [ 300.447147] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 300.447205] sd 2:0:1:0: [sda] Write Protect is off [ 300.447209] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 300.447309] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 301.296852] usb 1-2: reset full speed USB device using uhci_hcd and address 3 [ 301.468155] appletouch: Geyser mode initialized. [ 301.604608] usb 3-2: reset full speed USB device using uhci_hcd and address 2 [ 301.763808] applesmc: device has already been initialized (0xe0, 0x00). [ 301.963812] usb 4-1: reset full speed USB device using uhci_hcd and address 3 [ 302.033553] Restarting tasks ... <6>usb 4-1: USB disconnect, address 3 [ 302.050504] done. [ 302.188878] appletouch: incomplete data package (first byte: 2, length: 4). [ 303.076201] usb 4-1: new full speed USB device using uhci_hcd and address 4 [ 303.283452] usb 4-1: configuration #1 chosen from 1 choice [ 303.306080] input: HID 05ac:1000 as /class/input/input16 [ 303.351821] input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1 [ 303.373599] input: HID 05ac:1000 as /class/input/input17 [ 303.377051] input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1 [ 322.118951] end_request: I/O error, dev sr0, sector 319600 [ 322.118951] Buffer I/O error on device sr0, logical block 39950 [ 322.118951] Buffer I/O error on device sr0, logical block 39951 [ 322.118951] Buffer I/O error on device sr0, logical block 39952 [ 322.118951] Buffer I/O error on device sr0, logical block 39953 [ 322.118951] Buffer I/O error on device sr0, logical block 39954 [ 322.118951] Buffer I/O error on device sr0, logical block 39955 [ 322.118951] Buffer I/O error on device sr0, logical block 39956 [ 322.118951] Buffer I/O error on device sr0, logical block 39957 [ 322.118951] Buffer I/O error on device sr0, logical block 39958 [ 322.118951] Buffer I/O error on device sr0, logical block 39959 [ 327.366743] __ratelimit: 11029 messages suppressed [ 327.366743] Buffer I/O error on device sr0, logical block 45485 [ 332.434583] __ratelimit: 9711 messages suppressed [ 332.434595] Buffer I/O error on device sr0, logical block 50341 [ 337.414055] __ratelimit: 9307 messages suppressed [ 337.414055] Buffer I/O error on device sr0, logical block 54995 [ 342.503516] __ratelimit: 9711 messages suppressed [ 342.503528] Buffer I/O error on device sr0, logical block 59851 [ 350.185066] __ratelimit: 8903 messages suppressed [ 350.185066] type=1400 audit(1213222983.723:4): avc: denied { write } for pid=3430 comm="gmplayer" name=".dvdcss" dev=sda1 ino=3214304 scontext=a-12:user_r:user_mplayer_t tcontext=a-12:object_r:sysadm_home_t tclass=dir