Linux version 2.6.25-rc5-mm1 (kosaki@PQ-muneda) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #35 SMP Mon Mar 17 12:35:20 JST 2008 EFI v1.10 by Fujitsu: SALsystab=0x7fdebe00 ACPI 2.0=0x7f9a8000 SMBIOS=0xf0000 booting generic kernel on platform dig ACPI: RSDP 7F9A8000, 0024 (r2 FUJITS) ACPI: XSDT 7F9FDF70, 005C (r1 FUJITS PQ 3 FJ 1) ACPI: FACP 7F9FC780, 00F4 (r3 FUJITS PQ 1 FJ 1) ACPI: DSDT 7F9A8068, 54713 (r2 FUJITS PQ 1 MSFT 3000001) ACPI: FACS 7F9A8028, 0040 ACPI: APIC 7F9FC878, 06F6 (r1 FUJITS PQ 1 FJ 1) ACPI: SPCR 7F9FCF70, 0050 (r1 FUJITS PQ 1 FJ 1) ACPI: SRAT 7F9FCFC0, 0E00 (r1 FUJITS PQ 1 FJ 1) ACPI: SLIT 7F9FDDC0, 012C (r1 FUJITS PQ 1 FJ 1) ACPI: SPMI 7F9FDEF0, 0054 (r1 FUJITS PQ 1 FJ 1) ACPI: WSPT 7F9FDF48, 0028 (r1 FUJITS PQ 1 FJ 1) Number of logical nodes in system = 16 Number of memory chunks in system = 18 Reserving 256MB of memory at 256MB for crashkernel (System RAM: 7904MB) Entering add_active_range(2, 256, 29440) 0 entries of 51200 used Entering add_active_range(2, 4227072, 4259840) 1 entries of 51200 used Entering add_active_range(3, 23069696, 23134208) 2 entries of 51200 used Initial ramdisk at: 0xe0000000711a7000 (5099270 bytes) SAL 3.20: FUJITSU LIMITED PRIMEQUEST version 3.4 SAL Platform features: None SAL: AP wakeup using external interrupt vector 0xf0 ACPI: Local APIC address c0000000fee00000 PLATFORM int CPEI (0x3): GSI 22 (level, low) -> CPU 0 (0x0001) vector 30 8 CPUs available, 128 CPUs total MCA related initialization done sizeof(struct page) = 64 Zone PFN ranges: DMA 256 -> 65536 Normal 65536 -> 23134208 Movable zone start PFN for each node early_node_map[3] active PFN ranges 2: 256 -> 29440 2: 4227072 -> 4259840 3: 23069696 -> 23134208 Could not find start_pfn for node 0 On node 0 totalpages: 0 DMA zone: 0 pages used for memmap Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap Could not find start_pfn for node 1 On node 1 totalpages: 0 DMA zone: 0 pages used for memmap Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap On node 2 totalpages: 61952 DMA zone: 63 pages used for memmap DMA zone: 0 pages reserved DMA zone: 29121 pages, LIFO batch:1 Normal zone: 4096 pages used for memmap Normal zone: 28672 pages, LIFO batch:1 Movable zone: 0 pages used for memmap On node 3 totalpages: 64512 DMA zone: 0 pages used for memmap Normal zone: 63 pages used for memmap Normal zone: 64449 pages, LIFO batch:1 Movable zone: 0 pages used for memmap Could not find start_pfn for node 4 On node 4 totalpages: 0 DMA zone: 0 pages used for memmap Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap Could not find start_pfn for node 5 On node 5 totalpages: 0 DMA zone: 0 pages used for memmap Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap Could not find start_pfn for node 6 On node 6 totalpages: 0 DMA zone: 0 pages used for memmap Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap Could not find start_pfn for node 7 On node 7 totalpages: 0 DMA zone: 0 pages used for memmap Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap Could not find start_pfn for node 8 On node 8 totalpages: 0 DMA zone: 0 pages used for memmap Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap Could not find start_pfn for node 9 On node 9 totalpages: 0 DMA zone: 0 pages used for memmap Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap Could not find start_pfn for node 10 On node 10 totalpages: 0 DMA zone: 0 pages used for memmap Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap Could not find start_pfn for node 11 On node 11 totalpages: 0 DMA zone: 0 pages used for memmap Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap Could not find start_pfn for node 12 On node 12 totalpages: 0 DMA zone: 0 pages used for memmap Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap Could not find start_pfn for node 13 On node 13 totalpages: 0 DMA zone: 0 pages used for memmap Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap Could not find start_pfn for node 14 On node 14 totalpages: 0 DMA zone: 0 pages used for memmap Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap Could not find start_pfn for node 15 On node 15 totalpages: 0 DMA zone: 0 pages used for memmap Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap SMP: Allowing 128 CPUs, 120 hotplug CPUs Built 16 zonelists in Zone order, mobility grouping on. Total pages: 122242 Policy zone: Normal Kernel command line: BOOT_IMAGE=scsi0:\EFI\redhat\vmlinuz-kosatest root=/dev/VolGroup00/LogVol00 console=ttyS0 noquiet selinux=0 crashkernel=256M@256M vector=percpu ro PID hash table entries: 4096 (order: 12, 32768 bytes) CPU 0: base freq=266.666MHz, ITC ratio=6/4, ITC freq=399.999MHz Console: colour VGA+ 80x25 Placing software IO TLB between 0x50e0000 - 0x90e0000 Memory: 7691584k/7809088k available (8371k code, 402112k reserved, 5488k data, 1728k init) SLUB: Genslabs=17, HWalign=128, Order=0-4, MinObjects=60, CPUs=128, Nodes=1024 Calibrating delay loop... 3194.88 BogoMIPS (lpj=6389760) Dentry cache hash table entries: 1048576 (order: 7, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 6, 4194304 bytes) Mount-cache hash table entries: 4096 ACPI: Core revision 20070126 Boot processor id 0x0/0x1 Fixed BSP b0 value from CPU 1 CPU 1: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 138 cycles) CPU 1: base freq=266.666MHz, ITC ratio=6/4, ITC freq=399.999MHz CPU 2: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 138 cycles) CPU 2: base freq=266.666MHz, ITC ratio=6/4, ITC freq=399.999MHz CPU 3: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 138 cycles) CPU 3: base freq=266.666MHz, ITC ratio=6/4, ITC freq=399.999MHz CPU 4: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 515 cycles) CPU 4: base freq=266.666MHz, ITC ratio=6/4, ITC freq=399.999MHz CPU 5: synchronized ITC with CPU 0 (last diff 28 cycles, maxerr 459 cycles) CPU 5: base freq=266.666MHz, ITC ratio=6/4, ITC freq=399.999MHz CPU 6: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 514 cycles) CPU 6: base freq=266.666MHz, ITC ratio=6/4, ITC freq=399.999MHz CPU 7: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 515 cycles) CPU 7: base freq=266.666MHz, ITC ratio=6/4, ITC freq=399.999MHz Brought up 8 CPUs Total of 8 processors activated (25559.04 BogoMIPS). net_namespace: 328 bytes DMI 2.3 present. NET: Registered protocol family 16 ACPI: bus type pci registered ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: DMI System Vendor: ACPI: DMI Product Name: ACPI: DMI Product Version: ACPI: DMI Board Name: ACPI: DMI BIOS Vendor: FUJITSU LIMITED ACPI: DMI BIOS Date: 1/17/2008 ACPI: Please send DMI info above to linux-acpi@vger.kernel.org ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOSAPIC for interrupt routing ACPI: PCI Root Bridge [SNFF] (0000:ff) ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:1f.0: quirk: region 0c00-0c7f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0c80-0cbf claimed by ICH6 GPIO pci 0000:01:01.0: Boot video device PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PB._PRT] ACPI: PCI Root Bridge [PCI1] (0001:00) pci 0001:02:00.0: PXH quirk detected; SHPC device MSI disabled pci 0001:02:00.2: PXH quirk detected; SHPC device MSI disabled pci 0001:08:00.0: PXH quirk detected; SHPC device MSI disabled pci 0001:08:00.2: PXH quirk detected; SHPC device MSI disabled pci 0001:12:00.0: PXH quirk detected; SHPC device MSI disabled pci 0001:12:00.2: PXH quirk detected; SHPC device MSI disabled pci 0001:05:00.0: PXH quirk detected; SHPC device MSI disabled pci 0001:05:00.2: PXH quirk detected; SHPC device MSI disabled pci 0001:0d:00.0: PXH quirk detected; SHPC device MSI disabled pci 0001:0d:00.2: PXH quirk detected; SHPC device MSI disabled ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I2B1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I2B1.P2PA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I2B1.P2PB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I2B2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I2B2.P2PA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I2B2.P2PB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I2B4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I2B4.P2PA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I2B4.P2PB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I3B1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I3B1.P2PA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I3B1.P2PB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I3B3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I3B3.P2PA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I3B3.P2PB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I3B6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I3B6.P2PA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I3B6.P2PA.P2P8._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I3B6.P2PA.P2P9._PRT] ACPI: PCI Root Bridge [PCI2] (0002:00) ACPI: PCI Root Bridge [PCI3] (0003:00) ACPI: PCI Root Bridge [PCI4] (0004:00) ACPI: PCI Root Bridge [PCI5] (0005:00) ACPI: PCI Root Bridge [PCI6] (0006:00) ACPI: PCI Root Bridge [PCI7] (0007:00) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered GSI 8 (edge, high) -> CPU 0 (0x0001) vector 49 GSI 4 (edge, high) -> CPU 0 (0x0001) vector 50 pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized Time: itc clocksource has been installed. system 00:02: ioport range 0x4d0-0x4d1 has been reserved system 00:02: ioport range 0xc00-0xc7f has been reserved system 00:02: ioport range 0xc80-0xcbf has been reserved system 00:02: ioport range 0xcf8-0xcff has been reserved system 00:02: ioport range 0xd80-0xd81 has been reserved system 00:02: iomem range 0xfee00000-0xfeefffff has been reserved NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 3, 524288 bytes) TCP established hash table entries: 262144 (order: 6, 4194304 bytes) TCP bind hash table entries: 65536 (order: 5, 2097152 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 4928kB freed perfmon: version 2.0 IRQ 238 perfmon: Montecito PMU detected, 27 PMCs, 35 PMDs, 12 counters (47 bits) PAL Information Facility v0.5 perfmon: added sampling format default_format perfmon_default_smpl: default_format v2.0 registered Please use IA-32 EL for executing IA-32 binaries Total HugeTLB memory allocated, 0 SGI XFS with large block/inode numbers, no debug enabled msgmni has been set to 15032 for ipc namespace a000000100ce2480 io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered pci 0000:01:00.0: Firmware left e100 interrupts enabled; disabling pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling assign_interrupt_mode Found MSI capability Allocate Port Service[0001:00:01.1:pcie00] Allocate Port Service[0001:00:01.1:pcie01] Allocate Port Service[0001:00:01.1:pcie03] assign_interrupt_mode Found MSI capability Allocate Port Service[0001:00:01.2:pcie00] Allocate Port Service[0001:00:01.2:pcie01] Allocate Port Service[0001:00:01.2:pcie03] assign_interrupt_mode Found MSI capability Allocate Port Service[0001:00:01.4:pcie00] Allocate Port Service[0001:00:01.4:pcie01] Allocate Port Service[0001:00:01.4:pcie03] assign_interrupt_mode Found MSI capability Allocate Port Service[0001:00:02.1:pcie00] Allocate Port Service[0001:00:02.1:pcie01] Allocate Port Service[0001:00:02.1:pcie03] assign_interrupt_mode Found MSI capability Allocate Port Service[0001:00:02.3:pcie00] Allocate Port Service[0001:00:02.3:pcie01] Allocate Port Service[0001:00:02.3:pcie03] assign_interrupt_mode Found MSI capability Allocate Port Service[0001:00:02.6:pcie00] Allocate Port Service[0001:00:02.6:pcie01] Allocate Port Service[0001:00:02.6:pcie03] GSI 16 (level, low) -> CPU 0 (0x0001) vector 51 ACPI: PCI Interrupt 0001:1e:00.0[A] -> GSI 16 (level, low) -> IRQ 51 assign_interrupt_mode Found MSI capability ACPI: PCI Interrupt 0001:1f:08.0[A] -> GSI 16 (level, low) -> IRQ 51 assign_interrupt_mode Found MSI capability Allocate Port Service[0001:1f:08.0:pcie22] GSI 17 (level, low) -> CPU 0 (0x0001) vector 52 ACPI: PCI Interrupt 0001:1f:09.0[A] -> GSI 17 (level, low) -> IRQ 52 assign_interrupt_mode Found MSI capability Allocate Port Service[0001:1f:09.0:pcie22] _OSC FW not grant req. control AER service couldn't init device 0001:00:01.1:pcie01 - no _OSC support _OSC FW not grant req. control AER service couldn't init device 0001:00:01.2:pcie01 - no _OSC support _OSC FW not grant req. control AER service couldn't init device 0001:00:01.4:pcie01 - no _OSC support _OSC FW not grant req. control AER service couldn't init device 0001:00:02.1:pcie01 - no _OSC support _OSC FW not grant req. control AER service couldn't init device 0001:00:02.3:pcie01 - no _OSC support _OSC FW not grant req. control AER service couldn't init device 0001:00:02.6:pcie01 - no _OSC support EFI Time Services Driver v0.4 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled 00:05: ttyS0 at I/O 0x3f8 (irq = 50) is a 16550A console [ttyS0] enabled brd: module loaded Intel(R) PRO/1000 Network Driver - version 7.3.20-k2 Copyright (c) 1999-2006 Intel Corporation. e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0 e1000e: Copyright (c) 1999-2007 Intel Corporation. tg3.c:v3.87 (December 20, 2007) GSI 408 (level, low) -> CPU 0 (0x0001) vector 53 ACPI: PCI Interrupt 0001:03:01.0[A] -> GSI 408 (level, low) -> IRQ 53 eth0: Tigon3 [partno(BCM95704A41) rev 2100 PHY(serdes)] (PCIX:100MHz:64-bit) 1000Base-SX Ethernet 00:0b:5d:6f:02:a4 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] eth0: dma_rwctrl[769f4000] dma_mask[64-bit] GSI 409 (level, low) -> CPU 0 (0x0001) vector 54 ACPI: PCI Interrupt 0001:03:01.1[B] -> GSI 409 (level, low) -> IRQ 54 eth1: Tigon3 [partno(BCM95704A41) rev 2100 PHY(serdes)] (PCIX:100MHz:64-bit) 1000Base-SX Ethernet 00:0b:5d:6f:02:a5 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] eth1: dma_rwctrl[769f4000] dma_mask[64-bit] GSI 456 (level, low) -> CPU 0 (0x0001) vector 55 ACPI: PCI Interrupt 0001:06:01.0[A] -> GSI 456 (level, low) -> IRQ 55 eth2: Tigon3 [partno(BCM95704A41) rev 2100 PHY(serdes)] (PCIX:100MHz:64-bit) 1000Base-SX Ethernet 00:0b:5d:6f:02:8a eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] eth2: dma_rwctrl[769f4000] dma_mask[64-bit] GSI 457 (level, low) -> CPU 0 (0x0001) vector 56 ACPI: PCI Interrupt 0001:06:01.1[B] -> GSI 457 (level, low) -> IRQ 56 eth3: Tigon3 [partno(BCM95704A41) rev 2100 PHY(serdes)] (PCIX:100MHz:64-bit) 1000Base-SX Ethernet 00:0b:5d:6f:02:8b eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] eth3: dma_rwctrl[769f4000] dma_mask[64-bit] console [netcon0] enabled netconsole: network logging started Uniform Multi-Platform E-IDE driver ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ide-floppy driver 1.00 Driver 'sd' needs updating - please use bus_type methods mice: PS/2 mouse device common for all mice EFI Variables Facility v0.08 2004-May-17 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Freeing unused kernel memory: 1728kB freed usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 51 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 51, io base 0x00000d00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 52 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 52, io base 0x00000d20 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected GSI 18 (level, low) -> CPU 0 (0x0001) vector 57 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 57 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 57, io base 0x00000d40 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 51 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 51, io mem 0x85f04000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected Fusion MPT base driver 3.04.06 Copyright (c) 1999-2007 LSI Corporation Fusion MPT SPI Host driver 3.04.06 GSI 432 (level, low) -> CPU 0 (0x0001) vector 58 ACPI: PCI Interrupt 0001:04:01.0[A] -> GSI 432 (level, low) -> IRQ 58 mptbase: ioc0: Initiating bringup ioc0: LSI53C1030 C0: Capabilities={Initiator,Target} scsi0 : ioc0: LSI53C1030 C0, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=58 scsi 0:0:0:0: Direct-Access FUJITSU MAN3367MC 5207 PQ: 0 ANSI: 3 target0:0:0: Beginning Domain Validation target0:0:0: Ending Domain Validation target0:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127) sd 0:0:0:0: [sda] 71390320 512-byte hardware sectors (36552 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: b1 00 00 08 sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 71390320 512-byte hardware sectors (36552 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: b1 00 00 08 sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk scsi 0:0:6:0: Processor QLogic GEM359 0204 PQ: 0 ANSI: 2 target0:0:6: Beginning Domain Validation target0:0:6: Ending Domain Validation target0:0:6: asynchronous GSI 433 (level, low) -> CPU 0 (0x0001) vector 59 ACPI: PCI Interrupt 0001:04:01.1[B] -> GSI 433 (level, low) -> IRQ 59 mptbase: ioc1: Initiating bringup ioc1: LSI53C1030 C0: Capabilities={Initiator,Target} scsi1 : ioc1: LSI53C1030 C0, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=59 GSI 480 (level, low) -> CPU 0 (0x0001) vector 60 ACPI: PCI Interrupt 0001:07:01.0[A] -> GSI 480 (level, low) -> IRQ 60 mptbase: ioc2: Initiating bringup ioc2: LSI53C1030 C0: Capabilities={Initiator,Target} scsi2 : ioc2: LSI53C1030 C0, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=60 scsi 2:0:0:0: Direct-Access FUJITSU MAT3147NC 3701 PQ: 0 ANSI: 3 target2:0:0: Beginning Domain Validation target2:0:0: Ending Domain Validation target2:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 127) sd 2:0:0:0: [sdb] 287132440 512-byte hardware sectors (147012 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: b3 00 00 08 sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdb] 287132440 512-byte hardware sectors (147012 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: b3 00 00 08 sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 2:0:0:0: [sdb] Attached SCSI disk scsi 2:0:6:0: Processor QLogic GEM359 0204 PQ: 0 ANSI: 2 target2:0:6: Beginning Domain Validation target2:0:6: Ending Domain Validation target2:0:6: asynchronous GSI 481 (level, low) -> CPU 0 (0x0001) vector 61 ACPI: PCI Interrupt 0001:07:01.1[B] -> GSI 481 (level, low) -> IRQ 61 mptbase: ioc3: Initiating bringup ioc3: LSI53C1030 C0: Capabilities={Initiator,Target} scsi3 : ioc3: LSI53C1030 C0, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=61 Emulex LightPulse Fibre Channel SCSI driver 8.2.5 Copyright(c) 2004-2008 Emulex. All rights reserved. GSI 552 (level, low) -> CPU 0 (0x0001) vector 62 ACPI: PCI Interrupt 0001:0e:01.0[A] -> GSI 552 (level, low) -> IRQ 62 scsi4 : on PCI bus 0e device 08 irq 62 GSI 576 (level, low) -> CPU 0 (0x0001) vector 63 ACPI: PCI Interrupt 0001:10:01.0[A] -> GSI 576 (level, low) -> IRQ 63 scsi5 : on PCI bus 10 device 08 irq 63 device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. eepro100.c:v1.09j-t 9/29/99 Donald Becker eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others GSI 19 (level, low) -> CPU 0 (0x0001) vector 64 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 19 (level, low) -> IRQ 64 eth4: 0000:01:00.0, 00:0b:5d:6e:40:10, IRQ 64. Board assembly 1011ff-255, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0xd0a6c714). e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation GSI 20 (level, low) -> CPU 0 (0x0001) vector 65 ACPI: PCI Interrupt 0000:01:08.0[A] -> GSI 20 (level, low) -> IRQ 65 e100: eth5: e100_probe: addr 0x80ffe000, irq 65, MAC addr 00:0b:5d:6e:00:10 BUG: spinlock wrong CPU on CPU#3, udevd/2495 lock: a040000058246510, .magic: dead4ead, .owner: udevd/2495, .owner_cpu: 2 Call Trace: [] show_stack+0x80/0xa0 sp=e00001609262fbd0 bsp=e000016092620fd8 [] dump_stack+0x30/0x60 sp=e00001609262fda0 bsp=e000016092620fc0 [] spin_bug+0x1a0/0x1c0 sp=e00001609262fda0 bsp=e000016092620f90 [] _raw_spin_unlock+0xd0/0x120 sp=e00001609262fda0 bsp=e000016092620f60 [] _spin_unlock+0x20/0x40 sp=e00001609262fda0 bsp=e000016092620f40 [] do_wp_page+0x500/0xfe0 sp=e00001609262fda0 bsp=e000016092620ed8 [] handle_mm_fault+0xe80/0x10e0 sp=e00001609262fda0 bsp=e000016092620e50 [] ia64_do_page_fault+0x600/0xa40 sp=e00001609262fda0 bsp=e000016092620df0 [] ia64_leave_kernel+0x0/0x270 sp=e00001609262fe30 bsp=e000016092620df0 input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: ACPI0007:01 is registered as cooling_device1 ACPI: ACPI0007:02 is registered as cooling_device2 ACPI: ACPI0007:03 is registered as cooling_device3 ACPI: ACPI0007:04 is registered as cooling_device4 ACPI: ACPI0007:05 is registered as cooling_device5 ACPI: ACPI0007:06 is registered as cooling_device6 ACPI: ACPI0007:07 is registered as cooling_device7 eth3 renamed to __tmp357966323 eth1 renamed to eth3 eth0 renamed to eth1 sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 0:0:6:0: Attached scsi generic sg1 type 3 sd 2:0:0:0: Attached scsi generic sg2 type 0 scsi 2:0:6:0: Attached scsi generic sg3 type 3 Built 16 zonelists in Node order, mobility grouping on. Total pages: 121985 Policy zone: Normal device-mapper: multipath: version 1.0.5 loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sdb1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2031488k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2031488k