[PATCH v2 0/5] Add DDR (Dual Data-Rate) support for DW SPI controller

[Changhuang Liang]

This series implements DDR support for the DW SPI controller and also
implements 1-4-4-DTR read support for the MX66L1G45G.
This series has been tested on the JHB100 SoC.

Changes since v1:
- Add a new patch 1

Patch 2:
- Remove DDR instruction support; currently only supports 1S-nD-nD.
- Add dw_spi_supports_enh_ddr_op() to reject invalid DTR operations.
- Use the new DW_SPI_CAP_DDR flag to indicate DTR support.
- Use addr_data_ddr naming instead of spi_ddr.

Patch 3:
- Rework spi_nor_spimem_setup_op() so the command extension, 2-byte
  opcode and SNOR_F_SWAP16 handling apply only to the 8D-8D-8D DTR
  protocol. For 1S-xD-xD protocols the opcode remains a single byte
  sent in STR, and only the address, dummy and data phases are
  switched to DTR.

Patch 4:
- Add Miquel's Reviewed-by tag.

Patch 5:
- Add Miquel's Reviewed-by tag.
- Update commit message.

v1: https://lore.kernel.org/all/20261022102614.75696-1-changhuang.liang@xxxxxxxxxxxxxxxx/

Changhuang Liang (5):
  spi: dw: Detect DDR support in enhanced SPI mode
  spi: dw: Add DDR (Dual Data-Rate) support for enhanced SPI mode
  mtd: spi-nor: Support mixed 1S-xD-xD DTR protocols in
    spi_nor_spimem_setup_op()
  mtd: spi-nor: debugfs: Correct DTR protocol names for 1S-xD-xD modes
  mtd: spi-nor: macronix: Add 1-4-4 DTR read support for MX66L1G45G

 drivers/mtd/spi-nor/core.c     | 23 ++++----
 drivers/mtd/spi-nor/debugfs.c  |  8 +--
 drivers/mtd/spi-nor/macronix.c | 28 +++++++++-
 drivers/spi/spi-dw-core.c      | 96 ++++++++++++++++++++++++++++++----
 drivers/spi/spi-dw.h           |  6 +++
 5 files changed, 133 insertions(+), 28 deletions(-)

--
2.25.1