Re: [PATCH 3/3] arm64: dts: qcom: lemans-sa8255p: add ethernet nodes

[Bartosz Golaszewski]

On Fri, 23 Oct 2026 14:32:16 +0200, Konrad Dybcio
<konrad.dybcio@xxxxxxxxxxxxxxxx> said:
> On 10/23/26 11:02 AM, Bartosz Golaszewski wrote:
>> Add the ethernet nodes along with their serdes PHY nodes for the gearvm
>> variant of the lemans ride board. Enable scmi7 and scmi8 to serve the
>> EMACs.
>>
>> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxxxxxxxx>
>> ---
>>  arch/arm64/boot/dts/qcom/lemans-gearvm.dtsi      |  28 +++
>>  arch/arm64/boot/dts/qcom/lemans-sa8255p-ride.dts | 213 +++++++++++++++++++++++
>>  2 files changed, 241 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/lemans-gearvm.dtsi b/arch/arm64/boot/dts/qcom/lemans-gearvm.dtsi
>> index 4c155cbc79754af632848cd55b738e3ef0511cb5..c64cfd279af458e24fb48083ae549c96cfc07485 100644
>> --- a/arch/arm64/boot/dts/qcom/lemans-gearvm.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/lemans-gearvm.dtsi
>> @@ -58,6 +58,14 @@ &cpufreq_hw {
>>  	clock-names = "xo", "alternate";
>>  };
>>

...

>> +
>>  &firmware {
>>  	scm {
>>  		memory-region = <&tz_ffi_mem>;
>> @@ -3226,6 +3234,26 @@ cma: linux,cma {
>>  	};
>>  };
>>
>> +&soc {
>> +	serdes0: phy@8901000 {
>> +		compatible = "qcom,sa8255p-dwmac-sgmii-phy";
>
> Hmm.. I was hoping Shawn's DT reshuffling would land first
>

This series depends on Shawn's, I too hope it lands first. :)

> Are the PHYs hardwired? If so, you can move the phys= reference
> here

Yes, they are and will do in v2.

Bart