RE: [PATCH v3 0/4] Fix transmit handling on SCI/RSCI ports

[Biju Das]

Hi Krzysztof,

Thanks for the feedback.

> -----Original Message-----
> From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> Sent: 27 October 2026 07:24
> Subject: Re: [PATCH v3 0/4] Fix transmit handling on SCI/RSCI ports
> 
> On 27/10/2026 08:19, Biju Das wrote:
> > Hi Borislav Petkov,
> >
> > Thanks for the feedback.
> >
> >> -----Original Message-----
> >> From: Borislav Petkov <bp@xxxxxxxxx>
> >> Sent: 27 October 2026 05:58
> >> Subject: Re: [PATCH v3 0/4] Fix transmit handling on SCI/RSCI ports
> >>
> >> On Mon, Oct 26, 2026 at 11:23:32AM +0000, Biju Das wrote:
> >>>  drivers/tty/serial/rsci.c          |  4 ++-
> >>>  drivers/tty/serial/sh-sci-common.h |  4 +++
> >>>  drivers/tty/serial/sh-sci.c        | 71 ++++++++++++++++++++++++++------------
> >>>  3 files changed, 56 insertions(+), 23 deletions(-)
> >>
> >> $ ./scripts/get_maintainer.pl --no-rolestats -f
> >> drivers/tty/serial/rsci.c  drivers/tty/serial/sh-sci- common.h
> >> drivers/tty/serial/sh-sci.c Greg Kroah-Hartman
> >> <gregkh@xxxxxxxxxxxxxxxxxxx> Jiri Slaby <jirislaby@xxxxxxxxxx> Biju
> >> Das <biju.das.jz@xxxxxxxxxxxxxx> Geert Uytterhoeven
> >> <geert+renesas@xxxxxxxxx> Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
> >> Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> >> Frank Li <Frank.Li@xxxxxxx>
> >> linux-kernel@xxxxxxxxxxxxxxx
> >> linux-serial@xxxxxxxxxxxxxxx
> >>
> >> So why is
> >>
> >> x86@xxxxxxxxxx, linux-coco@xxxxxxxxxxxxxxx
> >>
> >> in your Cc: list?
> >>
> >> What can those people do about Renesas-something-serial driver?
> >
> > I have been told by some maintainers to use b4 for easy review rather
> > than using 'git send-mail'.
> >
> > If I do 'b4 prep --auto-to-cc' as per the b4 documentation,
> > x86@xxxxxxxxxx is automatically listed.
> 
> After 'b4 prep --auto-to-cc'  you edit the cover letter and see what is there, no? You can easily spot
> bogus addressed added.

Yes, that can be done in next revision. I thought I need to follow b4
Documentation that is the reason I haven't done any address filtering.

> 
> >
> > Can you please guide me how to remove x86@xxxxxxxxxx from b4 tooling
> > So that x86@xxxxxxxxxx will not automatically listed?
> 
> b4 does not add these addresses for these files.

Then how x86@xxxxxxxxxx added by 'b4 prep --auto-to-cc'? any pointers?

Cheers,
Biju