Re: [PATCH] arm64: dts: qcom: qcs6490-rb3gen2: Add SPI3 QUP core bandwidth OPP

[Konrad Dybcio]

On 10/25/26 2:43 PM, Viken Dadhaniya wrote:
> Short SPI transfers are sensitive to the bandwidth available on the QUP
> core interconnect path. An insufficient vote delays Serial Engine
> register and FIFO accesses, increasing command-dispatch latency.
> 
> Add a dedicated SPI3 OPP table with the valid 75 MHz and 100 MHz
> source-clock and RPMh power-domain OPPs. Add a 100000 kBps average and
> peak vote for the QUP core interconnect path. This improves MCP2518FD CAN
> payload throughput by approximately 38%.
> 
> Limit the vote to SPI3 on RB3Gen2, where it serves the MCP2518FD CAN
> controller and its frequent short SPI transfers. Other QUP/SPI instances
> do not require this vote, so avoid raising their interconnect bandwidth
> unnecessarily.

You can solve the general problem OR you can do what this and
create more work down the line. What if I connect a MCP2518FD
on SPI4? SPI5? SPI6?

Konrad