Re: [PATCH v3 0/3] arm: dts: aspeed: add Intel AVCRP and JNCRP BMC platforms

[Andrew Jeffery]

On Fri, 2026-10-23 at 11:20 +0200, Dawid Glazik wrote:
> Hi Andrew,
> 
> On 10/23/2026 6:17 AM, Andrew Jeffery wrote:
> > Hi Dawid,
> > 
> > On Wed, 2026-10-21 at 22:26 +0200, Dawid Glazik wrote:
> > > This series adds initial upstream support for the Intel AVCRP and JNCRP
> > > BMC platforms based on the ASPEED AST2600.
> > > 
> > > The first patch adds the board compatibles to the ASPEED binding. The
> > > remaining two patches add the board DTS files and register them in the
> > > ASPEED DTB build list.
> > > 
> > > Dawid Glazik (3):
> > >    dt-bindings: arm: aspeed: Add Intel AVCRP and JNCRP boards
> > >    ARM: dts: aspeed: add Intel AVCRP BMC
> > >    ARM: dts: aspeed: add Intel JNCRP BMC
> > > 
> > >   .../bindings/arm/aspeed/aspeed.yaml           |   2 +
> > >   arch/arm/boot/dts/aspeed/Makefile             |   2 +
> > >   .../dts/aspeed/aspeed-bmc-intel-avcrp.dts     | 322 ++++++++++++++++++
> > >   .../dts/aspeed/aspeed-bmc-intel-jncrp.dts     | 276 +++++++++++++++
> > >   4 files changed, 602 insertions(+)
> > >   create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-intel-avcrp.dts
> > >   create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-intel-jncrp.dts
> > > 
> > > 
> > > base-commit: e7ae89a0c97ce2b68b0983cd01eda67cf373517d
> > 
> > Can you please discuss why you based this series on v7.1-rc5? v7.3 has
> > been released, v7.1-rc5 is a long time ago.
> > 
> > In the future please base changes for the AST2600 on the latest -rc1,
> > or the aspeed/arm/dt branch of bmc/linux.git on git.kernel.org.
> > 
> 
> That's my mistake. I'll rebase onto aspeed/arm/dt of bmc/linux.git and 
> send v4. For future AST2600 changes I'll use that branch as the base.

Thanks.

> > > prerequisite-patch-id: 23091b539ec7723a865d82da7703bf70c6ed0222
> > 
> > Can you please rebase this patch to send it to Lee on its own. The
> > AST2600-based platforms currently generate a warning without it. I had
> > hoped Lee would apply it in the same cycle.
> 
> Sure, I will reach out to him.

Thanks for this also :)

Andrew