[PATCH 0/2] media: rc: meson-ir: wake the system from the remote

[christian . koever-draxl]

From: Christian Stefan Kövér-Draxl <ckoever@xxxxxxxxxx>

The suspend callback switches the decoder off, so a remote can never
wake the system. With the wakeup-source property, keep the decoder
running and arm its interrupt as a wake source instead.

Tested: suspend to RAM on an S905W2 box, resumed by the remote.

Tool use (Documentation/process/generated-content.rst):
This work was done with the help of an AI coding assistant, Claude
(Anthropic), used through Claude Code over many sessions. It did a large
part of the hands-on work: it read the vendor kernel and the firmware
interfaces, probed registers on the board, drafted the code and the
changelogs, and ran the builds, checkpatch, dt_binding_check and the
tests on the hardware. I directed the work, reviewed every change and
the final patches, and take responsibility for them. There is no single
prompt to quote; the sessions were of the form "find out why X fails on
this board, fix it, test it on the box".

Tested on an Amediatech X98Q TV box (Amlogic S905W2, S4 family, 2 GiB),
vendor U-Boot and BL31/OP-TEE, Linux 7.3 plus this work.

Christian Stefan Kövér-Draxl (2):
  dt-bindings: media: amlogic,meson6-ir: allow wakeup-source
  media: rc: meson-ir: allow the receiver to wake the system

 .../bindings/media/amlogic,meson6-ir.yaml       |  2 ++
 drivers/media/rc/meson-ir.c                     | 17 +++++++++++++++++
 2 files changed, 19 insertions(+)


base-commit: 7be4bc52fd9e0e55dc9a2e0232b89427d2c4b614
-- 
2.56.0