[PATCH v3 1/3] pinctrl: sunxi: dt: number the IRQ banks from the first one that has IRQs

[Pablo Mazzini]

prepare_function_table() numbers the IRQ banks from PA, even when PA
has none. The static drivers number only the banks that have IRQs, and
use irq_bank_map when the IRQ registers do not start at bank 0.

Do the same here, and give the A523 and A733, whose IRQ registers
start at PB, the map they need. Apply the map to the A733 register
layout too, which so far ignored it. This also fixes PK on both, which
was numbered 10 and written past the end of irq_array.

Signed-off-by: Pablo Mazzini <pmazzini@xxxxxxxxx>
---
 drivers/pinctrl/sunxi/pinctrl-sun55i-a523.c | 2 +-
 drivers/pinctrl/sunxi/pinctrl-sun60i-a733.c | 5 ++++-
 drivers/pinctrl/sunxi/pinctrl-sunxi-dt.c    | 8 +++-----
 drivers/pinctrl/sunxi/pinctrl-sunxi.h       | 7 ++++---
 4 files changed, 12 insertions(+), 10 deletions(-)

diff --git a/drivers/pinctrl/sunxi/pinctrl-sun55i-a523.c b/drivers/pinctrl/sunxi/pinctrl-sun55i-a523.c
index 801f62abc93d..940942bf6f95 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sun55i-a523.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun55i-a523.c
@@ -17,7 +17,7 @@ static const u8 a523_nr_bank_pins[SUNXI_PINCTRL_MAX_BANKS] =
 /*	  PA  PB  PC  PD  PE  PF  PG  PH  PI  PJ  PK */
 	{  0, 15, 17, 24, 16,  7, 15, 20, 17, 28, 24 };
 
-static const unsigned int a523_irq_bank_map[] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 };
+static const unsigned int a523_irq_bank_map[] = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 };
 
 static const u8 a523_irq_bank_muxes[SUNXI_PINCTRL_MAX_BANKS] =
 /*	  PA  PB  PC  PD  PE  PF  PG  PH  PI  PJ  PK */
diff --git a/drivers/pinctrl/sunxi/pinctrl-sun60i-a733.c b/drivers/pinctrl/sunxi/pinctrl-sun60i-a733.c
index ca82f08a3a65..3ebe926a1bc6 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sun60i-a733.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun60i-a733.c
@@ -21,8 +21,11 @@ static const u8 a733_irq_bank_muxes[SUNXI_PINCTRL_MAX_BANKS] =
 /*	  PA  PB  PC  PD  PE  PF  PG  PH  PI  PJ  PK */
 	{  0, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14};
 
+static const unsigned int a733_irq_bank_map[] = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 };
+
 static struct sunxi_pinctrl_desc a733_pinctrl_data = {
-	.irq_banks = 10,
+	.irq_banks = ARRAY_SIZE(a733_irq_bank_map),
+	.irq_bank_map = a733_irq_bank_map,
 	.irq_read_needs_mux = true,
 	.io_bias_cfg_variant = BIAS_VOLTAGE_PIO_POW_MODE_SEL,
 };
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi-dt.c b/drivers/pinctrl/sunxi/pinctrl-sunxi-dt.c
index 50a16f3bd131..9c5eb21a86a5 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi-dt.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi-dt.c
@@ -208,7 +208,7 @@ static int prepare_function_table(struct device *dev, struct device_node *pnode,
 	 * The extra functions will be filled in later.
 	 */
 	irq_bank = 0;
-	last_bank = 0;
+	last_bank = -1;
 	for (i = 0; i < npins; i++) {
 		struct sunxi_desc_pin *pin = &pins[i];
 		int bank = (pin->pin.number - pin_base) / PINS_PER_BANK;
@@ -221,16 +221,14 @@ static int prepare_function_table(struct device *dev, struct device_node *pnode,
 		func[1].muxval = 1;
 
 		if (irq_mux) {
-			if (bank > last_bank)
+			if (last_bank >= 0 && bank > last_bank)
 				irq_bank++;
 			func[lastfunc].muxval = irq_mux;
 			func[lastfunc].irqbank = irq_bank;
 			func[lastfunc].irqnum = pin->pin.number % PINS_PER_BANK;
 			func[lastfunc].name = "irq";
-		}
-
-		if (bank > last_bank)
 			last_bank = bank;
+		}
 
 		pin->functions = func;
 
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.h b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
index d09467ed437a..57a1e5e48f35 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.h
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
@@ -248,12 +248,13 @@ static inline u32 sunxi_irq_hw_bank_num(const struct sunxi_pinctrl_desc *desc,
 
 static inline u32 sunxi_irq_base_reg(const struct sunxi_pinctrl *pctl, u16 bank)
 {
+	u32 hw_bank = sunxi_irq_hw_bank_num(pctl->desc, bank);
+
 	if (pctl->flags & SUNXI_PINCTRL_NCAT3_REG_LAYOUT)
-		return pctl->bank_offset + bank * pctl->bank_mem_size +
+		return pctl->bank_offset + hw_bank * pctl->bank_mem_size +
 		       A733_IRQ_REGS_OFFSET;
 
-	return IRQ_REGS_OFFSET +
-	       sunxi_irq_hw_bank_num(pctl->desc, bank) * IRQ_MEM_SIZE;
+	return IRQ_REGS_OFFSET + hw_bank * IRQ_MEM_SIZE;
 }
 
 static inline u32 sunxi_irq_cfg_reg(const struct sunxi_pinctrl *pctl,
-- 
2.52.0