[PATCH v2 0/3] arm64: dts: qcom: Add initial Motorola Moto G10 support

[Michael McAllister]

Hi Konrad, all,

Thanks for the review. I've updated the Moto G10 (SM4250) series with
a separate patch for the shared idle-state fix. I've disabled Bluetooth
for now while I work through the remaining driver changes.

Regarding the magic smoke, I checked the 25 voltage ranges against
the Android DT pulled from the G10, and they're all within the vendor
ranges. The 640 mV L8 setting also matches Android's ICNSS override.
These settings are also running on my device.

Changes since v1:
- Correct the cluster idle-state parameters in sm6115.dtsi first.
- Use QCOM_ID_SM4250, delete reserved-memory nodes by label, and tidy
  the comments and redundant USB defaults.
- Keep GPIOs 14-17 reserved; I haven't established their board-specific
  use.
- Keep both framebuffer bus clocks enabled, disable DISPCC, and point
  display0 at MDSS to preserve the bootloader display.
- Leave Bluetooth disabled pending the separate shutdown fixes.

The DT passes schema validation and boots on the phone using separate
Android bootloader handoff/alignment code, with USB transfers and
read-only eMMC access tested. GPU, Wi-Fi, DSPs and suspend weren't
exercised in that minimal test image.

v1: https://lore.kernel.org/linux-arm-msm/cover.1792703903.git.me@xxxxxxxxxxxxxxxxxxxxx/


Michael McAllister (3):
  arm64: dts: qcom: sm6115: Correct cluster idle state parameters
  dt-bindings: arm: qcom: Add Motorola Moto G10
  arm64: dts: qcom: Add Motorola Moto G10

 .../devicetree/bindings/arm/qcom.yaml         |   1 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/sm4250-motorola-capri.dts   | 374 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/sm6115.dtsi          |   8 +-
 4 files changed, 380 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm64/boot/dts/qcom/sm4250-motorola-capri.dts


base-commit: d053e38e614fb2e383b298ce8fc308a780d7f209
-- 
2.39.5