Re: [PATCH v2 0/4] This series adds support for Texas Instruments OPT4041 Ambient light sensor

[Jonathan Cameron]

On Fri, 23 Oct 2026 14:30:27 +0200
Jesper X Nilsson <jesper.x.nilsson@xxxxxxxx> wrote:

> Extend the opt4001 driver to support OPT4041, since it is so similar to
> OPT4001. The OPT4041 adds a second channel, a wide band channel ranging
> from 380nm to 1000nm. The register map is almost the same for both
> devices. OPT4001 has an internal fifo of size four, OPT4041 has two
> fifos of size two, one for each channel.
> 
> Since OPT4041 has two channels it has one bit in register 0Bh to select
> which channel is compared to the threshold register. The driver does not
> support setting the threshold registers, so no new support has been
> added for this.
> 
> The OPT4041 is pin compatible and has the same package as
> opt4001-sot-5x3. Although the device id is different, I added a new
> compatible string since the driver already had different compatible
> strings to differentiate between the two OPT4001.
> 
> Datasheet: https://www.ti.com/lit/gpn/opt4041
> Signed-off-by: Jesper X Nilsson <jesper.x.nilsson@xxxxxxxx>


Normally I'd say slow down to give more time for review, but seems
you got good reviews anyway and the code looks clean to me.

Ah well, sometimes you win - but generally wait a few days at lesat
between versions.

Applied to the testing branch of iio.git. I'll be rebasing that
on rc1 once available.

thanks,

Jonathan