Re: [RFC PATCH v0] Docs/mm/damon/design: document data attributes report infra design (beyond page table accessed-bit milestone 2)

[Ravi Jonnalagadda]

Hi SJ,

On Wed, 21 Oct 2026 22:29:12 -0700 SJ Park <sj@xxxxxxxxxx> wrote:

> Hi Ravi,
>
> On Wed, 21 Oct 2026 21:17:24 -0700 Ravi Jonnalagadda <ravis.opensrc@xxxxxxxxx> wrote:
>
[...]
>
> Thank you for your detailed review and testing of the first design!  I'd still
> like to try decoding idea first, mainly for quick prototyping.

Sounds good.  Starting with decode makes sense, especially for VMs
where hardware address-sampling PMUs are often unavailable; some tips
for the prototype are in the other reply [1].

[...]
> > Yes, if the report has an address field with a validity bit and carries
> > the producing report-type (attr) id.  Then IBS, PEBS, Arm SPE (through
> > an adapter, since SPE uses the perf AUX buffer) and device-side
> > monitors all produce the same report, into the same queues and probes.
>
> Thank you for confirming.  And yes, I think we can add more (union) fields to
> the report structure.
>
> However, could you further clarify what are the validity bit and attr id, and
> why those are needed?  I'm still newbie to perf event, please bear in mind with
> me.

Neither is perf-specific:

- Validity bit (or union tag): a way to tell whether a report carries a
  virtual address, a physical address, or both.  For example, a decoded
  sample has no physical address if the page is not mapped.  If you use
  a union with a type field, that already covers it.

- Attr id: an id of the producer (report type) that made the report.  If
  several producers later feed one queue (e.g. perf sampling and a
  device-side monitor), a probe can filter on, or weigh, reports by
  their source.  If each queue only ever has one producer, the queue
  already identifies it, and the field is not needed.

[...]
> > 4. Binary search over a sorted region snapshot (your todo in
> >    kdamond_apply_access_report()) beats a linear walk from about 2
> >    reports per interval for 1,000 regions (a model, to be measured).
>
> Yes, this efficient region-report matching would be important.  We could also
> consider starting with linear walk and later optimize, though.

Agreed; starting with a linear walk for the prototype is fine, and once
it is out, happy to measure where binary search starts to matter.

[...]
> > 5. Samplers can stop silently: in a report on the v4 thread [1], IBS
[...]
> Unfortunately my understanding of perf event is not yet good enough to
> understand this in depth.  I will revisit this after starting implementation.

Sure.  The one part worth keeping in mind from the start: a sampler can
stop without any error, so a counter of reports received and dropped
helps tell "no accesses" from "no samples".

[...]
> >   - The queue: the per-CPU seqcount design in note 2 (suggested), or
> >     ftrace's ring buffer with one iterator per reader.
>
> My current plan is to use DAMON's original simple lockless and global queue per
> report queue.  Let me know if the report queue design is not clearly explaining
> what it would look like, or there is a clear problem.

A global queue is fine to start with, and the design is clear.  One
thing to keep in mind: perf writers run in interrupt or NMI context on
all CPUs at once, and an NMI can arrive in the middle of another write.
So reserving a slot needs to be lock-free, and a reader should not see
a half-written report.  If the design already covers that, there is
nothing to add.

[...]
> As soon as this design discussion is completed, I will start prototype
> implementation and share it as the next RFC version, as soon as possible.  Your
> review and test of the version will be super helpful.  I may also ask you some
> questions for perf event and your prototypes.  Thanks in advance for your help.
>
> There are competing works, though.  It would take time.  I expect about one
> month at minimum.  It might take longer; Thanksgiving holidays could be helpful
> to give me a time to concentrate.  Please bear in mind.  But once the initial
> prototype is implemented, I believe we could quickly iterate and meet the ETA
> (LSFMMBPF'27).

No rush on the timeline; that plan sounds good.  Please feel free to
ask any time, and I will be happy to share the test programs and review
and test the prototype when it is out.

Thanks,
Ravi

[1] https://lore.kernel.org/r/20261023194848.2449-1-ravis.opensrc@xxxxxxxxx