[PATCH v2 06/17] iio: adc: rcar-gyroadc: Discard pm_runtime_put_autosuspend() return values

[Brian Norris]

This driver propagates the return value of pm_runtime_put_autosuspend(),
which is not particularly useful.

Returning an error code from pm_runtime_put_autosuspend() merely means
that it has not queued up a timer or work item to check whether or not
the device can be suspended and there are many perfectly valid
situations in which that can happen, like after writing "on" to the
device's runtime PM "control" attribute in sysfs for one example.

For this reason, modify this driver to simply discard the
pm_runtime_put_autosuspend() return value.

This will facilitate a planned change of the
pm_runtime_put_autosuspend() return type to void in the future, similar
to commit 3afd8df02433 ("PM: runtime: Change pm_runtime_put() return
type to void").

Signed-off-by: Brian Norris <briannorris@xxxxxxxxxxxx>
---

Changes in v2:
 * Split iio patch into per-driver patches

 drivers/iio/adc/rcar-gyroadc.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/iio/adc/rcar-gyroadc.c b/drivers/iio/adc/rcar-gyroadc.c
index d38cf3caeae0..0d3b061d6ec2 100644
--- a/drivers/iio/adc/rcar-gyroadc.c
+++ b/drivers/iio/adc/rcar-gyroadc.c
@@ -199,10 +199,8 @@ static int rcar_gyroadc_read_raw(struct iio_dev *indio_dev,
 		*val = readl(priv->regs + datareg);
 		*val &= BIT(priv->sample_width) - 1;
 
-		ret = pm_runtime_put_autosuspend(priv->dev);
+		pm_runtime_put_autosuspend(priv->dev);
 		iio_device_release_direct(indio_dev);
-		if (ret < 0)
-			return ret;
 
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
-- 
2.56.0.218.g1ec904b173-goog