Re: [PATCH v2 3/3] ARM: dts: imx6q-apalis: Add VGA overlay

[Frank Li]

On Mon, Oct 19, 2026 at 07:17:16AM -0300, Leonardo Costa wrote:
> From: Leonardo Costa <leonardo.costa@xxxxxxxxxxx>
>
> Add a device tree overlay for the VGA output available on the Apalis
> Evaluation Board, which is driven from a parallel RGB interface passing
> through a non-programmable video DAC to a VGA connector, without VESA
> DDC I2C signals.
>
> The non-programmable video DAC consists of a simple resistor ladder that
> converts the digital 16-bit RGB signal to VGA. The VGA output is gated by
> an active-low data-enable signal.
>
> The overlay is also combined with the various Apalis Evaluation Board
> device trees to provide ready-to-use DTBs.
>
> Signed-off-by: Leonardo Costa <leonardo.costa@xxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/nxp/imx/Makefile                 | 21 ++++++
>  .../boot/dts/nxp/imx/imx6q-apalis-eval-vga.dtso    | 80 ++++++++++++++++++++++

what's difference with

https://lore.kernel.org/imx/20261019-colibri-imx6-overlays-v1-5-e4d028727382@xxxxxxxxxxx/T/#u

Is it possible share one dtso also?

Frank