[PATCH v2 2/3] dt-bindings: display: panel: add Smartisan TD4362

[tianshi12127]

From: Lu Chen <tianshi12127@xxxxxxxxx>

Document the Smartisan TD4362, a 1080x2242 command mode panel
found in the Smartisan R1 (trident) smartphone.

Signed-off-by: Lu Chen <tianshi12127@xxxxxxxxx>
---
 .../display/panel/smartisan,td4362.yaml       | 75 +++++++++++++++++++
 1 file changed, 75 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/smartisan,td4362.yaml

diff --git a/Documentation/devicetree/bindings/display/panel/smartisan,td4362.yaml b/Documentation/devicetree/bindings/display/panel/smartisan,td4362.yaml
new file mode 100644
index 000000000000..d9a18cbe635a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/smartisan,td4362.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/smartisan,td4362.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Smartisan TD4362 MIPI-DSI panel
+
+maintainers:
+  - Lu Chen <tianshi12127@xxxxxxxxx>
+
+description:
+  The Smartisan TD4362 is a 1080x2242 command mode panel found in the
+  Smartisan R1 (trident) smartphone.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: smartisan,td4362
+
+  reg:
+    maxItems: 1
+
+  vddio-supply:
+    description: I/O voltage rail
+
+  vsp-supply:
+    description: Positive source voltage rail
+
+  vsn-supply:
+    description: Negative source voltage rail
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - vddio-supply
+  - vsp-supply
+  - vsn-supply
+  - reset-gpios
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "smartisan,td4362";
+            reg = <0>;
+            vddio-supply = <&vreg_l14a_1p88>;
+            vsp-supply = <&lab>;
+            vsn-supply = <&ibb>;
+            reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+            backlight = <&backlight>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+
+...
-- 
2.56.0