[PATCH v3 2/4] arm64: dts: qcom: glymur: Add videocc sleep clock

[Shawn Guo]

The video clock controller binding describes three clock inputs for
Glymur: the board XO, the active-only board XO and the 32 kHz sleep
clock. The videocc node passes only the first two.

Pass the board sleep clock as the third input. No functional change,
the video sleep clock keeps the rate left by the bootloader and has no
rate consumer.

Assisted-by: LLM
Reviewed-by: Abel Vesa <abel.vesa@xxxxxxxxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
Signed-off-by: Shawn Guo <shengchao.guo@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/glymur.dtsi | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/glymur.dtsi b/arch/arm64/boot/dts/qcom/glymur.dtsi
index 65a398c0a992..b389f953f97f 100644
--- a/arch/arm64/boot/dts/qcom/glymur.dtsi
+++ b/arch/arm64/boot/dts/qcom/glymur.dtsi
@@ -5810,7 +5810,8 @@ videocc: clock-controller@aaf0000 {
 			compatible = "qcom,glymur-videocc";
 			reg = <0x0 0x0aaf0000 0x0 0x10000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK_A>;
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
 
 			power-domains = <&rpmhpd RPMHPD_MMCX>,
 					<&rpmhpd RPMHPD_MXC>;
-- 
2.43.0