Re: [PATCH net-next v3 1/2] net: phy: aquantia: restore EEE discovery in get_features callbacks

[Andrew Lunn]

On Fri, Oct 16, 2026 at 11:23:18AM +0800, Hongmei Xu wrote:
> aqr115c_get_features() populates phydev->supported by ORing in
> phy_gbit_features and setting the 2.5G bit directly. This skips
> genphy_c45_pma_read_abilities(), which is responsible for reading
> EEE capabilities and filling phydev->supported_eee.
> 
> As a result, phy_probe() never populates supported_eee for AQR111,
> AQR114C and AQR115C. The kernel then clears advertising_eee:
> 
>   linkmode_and(phydev->advertising_eee, phydev->supported_eee,
>                phydev->advertising_eee);
> 
> This means EEE advertisement registers cannot be changed via ethtool
> and ethtool --show-eee reports no supported modes.
> 
> Fix this by following the pattern used in aqr105_get_features(): call
> genphy_c45_pma_read_abilities() as the base, then set the 2.5G bit
> explicitly since the PHY does not report it correctly in PMA registers.
> 
> Also fix aqr111_get_features() to check and propagate the return value
> of aqr115c_get_features(), which can now fail since it calls
> genphy_c45_pma_read_abilities().
> 
> Signed-off-by: Hongmei Xu <hongmei.xu@xxxxxxxxxxxxxxxx>

Reviewed-by: Andrew Lunn <andrew@xxxxxxx>

    Andrew