[PATCH 11/14] ARM: dts: imx6q-h100: rename port to port@0 for mipi_csi

[Frank . Li]

From: Frank Li <Frank.Li@xxxxxxx>

mipi_csi port@0 is input port. There are not 'port' at binding doc. Rename
it to port@0 and add reg = <0> to fix below CHECK_DTBS warnings:
  arch/arm/boot/dts/nxp/imx/imx6q-h100.dtb: mipi@21dc000 (fsl,imx6-mipi-csi2): 'port' does not match any of the regexes: '^pinctrl-[0-9]+$', '^port@[1-4]$'
        from schema $id: http://devicetree.org/schemas/media/fsl,imx6-mipi-csi2.yaml

Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
 arch/arm/boot/dts/nxp/imx/imx6q-h100.dts | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts b/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts
index 4c8ea43815597..a5180c655c9a6 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts
@@ -335,7 +335,9 @@ MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x1b0b0
 &mipi_csi {
 	status = "okay";
 
-	port {
+	port@0 {
+		reg = <0>;
+
 		mipi_csi2_in: endpoint {
 			remote-endpoint = <&tc358743_out>;
 			data-lanes = <1 2 3 4>;

-- 
2.43.0