[PATCH] MIPS: Alchemy: Register interrupt chips with the IRQ core

[Florian Fainelli]

Alchemy initializes its interrupt chips through the set-type callbacks,
which use irq_set_chip_handler_name_locked() to assign the chip and flow
handler. This bypasses irq_set_chip() and its descriptor registration.

Since /proc/interrupts switched to iterating the IRQ descriptor maple tree,
the statically allocated Alchemy descriptors are no longer found. On an
MTX-1, the file contains only the CPU header and ERR counter even though
the timer, serial, Ethernet and PCI wireless interrupts work.

Register each IC0/IC1 interrupt chip through irq_set_chip() before setting
the initial trigger type. Do the same for the Au1300 GPIC. Keep the locked
set-type callbacks for later trigger changes.

Fixes: 171cc0d9eed1 ("genirq/proc: Speed up /proc/interrupts iteration")
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
 arch/mips/alchemy/common/irq.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/arch/mips/alchemy/common/irq.c b/arch/mips/alchemy/common/irq.c
index 2403afcd2fb9..d2fa8731fb3c 100644
--- a/arch/mips/alchemy/common/irq.c
+++ b/arch/mips/alchemy/common/irq.c
@@ -892,15 +892,21 @@ static void __init au1000_init_irq(struct alchemy_irqmap *map)
 	mips_cpu_irq_init();
 
 	/* register all 64 possible IC0+IC1 irq sources as type "none".
+	 * Register each chip with the IRQ core before setting its type so
+	 * the descriptors are included in interrupt enumeration.
 	 * Use set_irq_type() to set edge/level behaviour at runtime.
 	 */
 	for (irq_nr = AU1000_INTC0_INT_BASE;
-	     (irq_nr < AU1000_INTC0_INT_BASE + 32); irq_nr++)
+	     (irq_nr < AU1000_INTC0_INT_BASE + 32); irq_nr++) {
+		irq_set_chip(irq_nr, &au1x_ic0_chip);
 		au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE);
+	}
 
 	for (irq_nr = AU1000_INTC1_INT_BASE;
-	     (irq_nr < AU1000_INTC1_INT_BASE + 32); irq_nr++)
+	     (irq_nr < AU1000_INTC1_INT_BASE + 32); irq_nr++) {
+		irq_set_chip(irq_nr, &au1x_ic1_chip);
 		au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE);
+	}
 
 	/*
 	 * Initialize IC0, which is fixed per processor.
@@ -947,6 +953,7 @@ static void __init alchemy_gpic_init_irq(const struct alchemy_irqmap *dints)
 
 	/* register an irq_chip for them, with 2nd highest priority */
 	for (i = ALCHEMY_GPIC_INT_BASE; i <= ALCHEMY_GPIC_INT_LAST; i++) {
+		irq_set_chip(i, &au1300_gpic);
 		au1300_set_irq_priority(i, 1);
 		au1300_gpic_settype(irq_get_irq_data(i), IRQ_TYPE_NONE);
 	}
-- 
2.53.0