Re: [PATCH net v3] net: phy: qcom: at803x: Apply IPQ5018 analog settings at probe

[patchwork-bot+netdevbpf]

Hello:

This patch was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba@xxxxxxxxxx>:

On Fri,  2 Oct 2026 23:04:08 +0200 you wrote:
> ipq5018_probe() pulses the PHY reset, after which the IPQ5018 internal
> GE PHY starts autonegotiating with its reset-default analog settings.
> ipq5018_config_init() writes the analog settings only when the MAC
> attaches the PHY, usually when the interface is opened. On a board
> where the PHY connects to a QCA8337 PHY without a cable, 1000BASE-T
> does not come up in the meantime, SmartSpeed downshifts both PHYs, and
> only the IPQ5018 side restores its 1000BASE-T advertisement at attach,
> so the link stays down.
> 
> [...]

Here is the summary with links:
  - [net,v3] net: phy: qcom: at803x: Apply IPQ5018 analog settings at probe
    https://git.kernel.org/netdev/net-next/c/17baf30a0e64

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html