Re: [PATCH RFC v2 3/4] phy: qcom-mipi-csi2: Rename the D-PHY init sequence

From: Bryan O'Donoghue

Date: Fri Oct 16 2026 - 07:12:38 EST


On 16/10/2026 11:57, George Neacsu via B4 Relay wrote:
From: George Neacsu <geocausa@xxxxxxxxx>

The init sequence and its size describe the D-PHY mode only. Call them
dphy_init_seq and dphy_lane_array_size, so that a C-PHY sequence can sit
next to them under matching names.

No functional change.

Suggested-by: Bryan O'Donoghue <bod@xxxxxxxxxx>
Assisted-by: Claude:claude-opus-5-5
Signed-off-by: George Neacsu <geocausa@xxxxxxxxx>
---
drivers/phy/qualcomm/phy-qcom-mipi-csi2-3ph-dphy.c | 8 ++++----
drivers/phy/qualcomm/phy-qcom-mipi-csi2.h | 4 ++--
2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-mipi-csi2-3ph-dphy.c b/drivers/phy/qualcomm/phy-qcom-mipi-csi2-3ph-dphy.c
index 966d79c98..b2d4ec3e8 100644
--- a/drivers/phy/qualcomm/phy-qcom-mipi-csi2-3ph-dphy.c
+++ b/drivers/phy/qualcomm/phy-qcom-mipi-csi2-3ph-dphy.c
@@ -246,8 +246,8 @@ phy_qcom_mipi_csi2_gen2_config_lanes(struct mipi_csi2phy_device *csi2phy,
u8 settle_cnt)
{
const struct mipi_csi2phy_device_regs *regs = csi2phy_dev_to_regs(csi2phy);
- const struct mipi_csi2phy_lane_regs *r = regs->init_seq;
- int i, array_size = regs->lane_array_size;
+ const struct mipi_csi2phy_lane_regs *r = regs->dphy_init_seq;
+ int i, array_size = regs->dphy_lane_array_size;
u32 val;

for (i = 0; i < array_size; i++, r++) {
@@ -372,8 +372,8 @@ static struct mipi_csi2_genpd x1e_genpds[] = {
const struct mipi_csi2phy_soc_cfg mipi_csi2_dphy_4nm_x1e = {
.ops = &phy_qcom_mipi_csi2_ops_3ph_1_0,
.reg_info = {
- .init_seq = lane_regs_x1e80100,
- .lane_array_size = ARRAY_SIZE(lane_regs_x1e80100),
+ .dphy_init_seq = lane_regs_x1e80100,
+ .dphy_lane_array_size = ARRAY_SIZE(lane_regs_x1e80100),
.common_regs_offset = 0x1000,
},
.supply_names = (const char **)x1e_supplies,
diff --git a/drivers/phy/qualcomm/phy-qcom-mipi-csi2.h b/drivers/phy/qualcomm/phy-qcom-mipi-csi2.h
index 7e55ae007..0d6031a4d 100644
--- a/drivers/phy/qualcomm/phy-qcom-mipi-csi2.h
+++ b/drivers/phy/qualcomm/phy-qcom-mipi-csi2.h
@@ -48,8 +48,8 @@ struct mipi_csi2phy_lane_regs {
};

struct mipi_csi2phy_device_regs {
- const struct mipi_csi2phy_lane_regs *init_seq;
- const int lane_array_size;
+ const struct mipi_csi2phy_lane_regs *dphy_init_seq;
+ const int dphy_lane_array_size;
const u32 common_regs_offset;
};


--
2.53.0
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>