[PATCH v3] crypto: talitos: fix probe IRQ ordering
From: Rosen Penev
Date: Sat Oct 03 2026 - 17:27:34 EST
The talitos interrupt handlers schedule priv->done_task[] via
tasklet_schedule(). In probe(), talitos_probe_irq() ran before
tasklet_init(), so an interrupt arriving during that window (a shared
IRQ, or a completion pending from an earlier transmission) would
schedule an uninitialized tasklet.
Resolve the IRQ numbers before the tasklet_init() calls so the
done_task[] selection can see the secondary IRQ, and only request the
IRQs after the channel fifos are allocated and the device is
initialized. Every structure the handlers touch is then fully set up
before interrupts are enabled. This matches remove(), which frees the
IRQs before killing the tasklets.
Assisted-by: LLM
Signed-off-by: Rosen Penev <rosenp@xxxxxxxxx>
---
v3: reshuffle again to fix IRQs.
v2: reshuffle code to avoid NULL derefs
drivers/crypto/talitos.c | 48 ++++++++++++++++++++++------------------
1 file changed, 26 insertions(+), 22 deletions(-)
diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index 41a87d7c30a0..70f7ad9e09f9 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -3353,21 +3353,13 @@ static int talitos_probe_irq(struct platform_device *ofdev)
int err;
bool is_sec1 = has_ftr_sec1(priv);
- priv->irq[0] = platform_get_irq(ofdev, 0);
- if (priv->irq[0] < 0)
- return priv->irq[0];
-
if (is_sec1) {
err = request_irq(priv->irq[0], talitos1_interrupt_4ch, 0,
dev_driver_string(dev), priv);
goto primary_out;
}
- priv->irq[1] = platform_get_irq_optional(ofdev, 1);
- if (priv->irq[1] == -EPROBE_DEFER)
- return priv->irq[1];
-
- /* get the primary irq line */
+ /* single (or primary) irq line */
if (priv->irq[1] < 0) {
err = request_irq(priv->irq[0], talitos2_interrupt_4ch, 0,
dev_driver_string(dev), priv);
@@ -3379,13 +3371,11 @@ static int talitos_probe_irq(struct platform_device *ofdev)
if (err)
goto primary_out;
- /* get the secondary irq line */
+ /* secondary irq line */
err = request_irq(priv->irq[1], talitos2_interrupt_ch1_3, 0,
dev_driver_string(dev), priv);
- if (err) {
+ if (err)
dev_err(dev, "failed to request secondary irq\n");
- priv->irq[1] = 0;
- }
return err;
@@ -3404,12 +3394,27 @@ static int talitos_probe(struct platform_device *ofdev)
struct device_node *np = ofdev->dev.of_node;
struct talitos_private *priv;
unsigned int num_channels;
+ void __iomem *reg;
int i, err;
int stride;
+ int irq0;
+ int irq1;
if (of_property_read_u32(np, "fsl,num-channels", &num_channels))
return -EINVAL;
+ irq0 = platform_get_irq(ofdev, 0);
+ if (irq0 < 0)
+ return irq0;
+
+ irq1 = platform_get_irq_optional(ofdev, 1);
+ if (irq1 == -EPROBE_DEFER)
+ return irq1;
+
+ reg = devm_platform_ioremap_resource(ofdev, 0);
+ if (IS_ERR(reg))
+ return PTR_ERR(reg);
+
priv = devm_kzalloc(dev, struct_size(priv, chan, num_channels), GFP_KERNEL);
if (!priv)
return -ENOMEM;
@@ -3425,12 +3430,7 @@ static int talitos_probe(struct platform_device *ofdev)
spin_lock_init(&priv->reg_lock);
- priv->reg = devm_platform_ioremap_resource(ofdev, 0);
- if (IS_ERR(priv->reg)) {
- dev_err(dev, "failed to of_iomap\n");
- err = PTR_ERR(priv->reg);
- goto err_out;
- }
+ priv->reg = reg;
/* get SEC version capabilities from device tree */
of_property_read_u32(np, "fsl,channel-fifo-len", &priv->chfifo_len);
@@ -3481,9 +3481,8 @@ static int talitos_probe(struct platform_device *ofdev)
stride = TALITOS2_CH_STRIDE;
}
- err = talitos_probe_irq(ofdev);
- if (err)
- goto err_out;
+ priv->irq[0] = irq0;
+ priv->irq[1] = irq1;
if (has_ftr_sec1(priv)) {
if (priv->num_channels == 1)
@@ -3540,6 +3539,11 @@ static int talitos_probe(struct platform_device *ofdev)
goto err_out;
}
+ /* enable interrupts once the channel fifos and tasklets are set up */
+ err = talitos_probe_irq(ofdev);
+ if (err)
+ goto err_out;
+
/* register the RNG, if available */
if (hw_supports(dev, DESC_HDR_SEL0_RNG)) {
err = talitos_register_rng(dev);
--
2.56.0