[PATCH 20/38] arm: dts: qcom: ipq8064: Add newline between subnodes

[Waqar Hameed]

There should be a newline between subnodes. Found/fixed with
dtfmt (Devicetree Source formatter).

Signed-off-by: Waqar Hameed <waqar.hameed@xxxxxxxx>
---
 arch/arm/boot/dts/qcom/qcom-ipq8064-v1.0.dtsi | 1 +
 arch/arm/boot/dts/qcom/qcom-ipq8064-v2.0.dtsi | 1 +
 arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi      | 2 ++
 3 files changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064-v1.0.dtsi
index 49de9752632f6..316dbe55bec8b 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq8064-v1.0.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064-v1.0.dtsi
@@ -26,6 +26,7 @@ button-1 {
 			linux,input-type = <1>;
 			debounce-interval = <60>;
 		};
+
 		button-2 {
 			label = "wps";
 			linux,code = <KEY_WPS_BUTTON>;
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064-v2.0.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064-v2.0.dtsi
index 2f117d576daf3..deece92f610f3 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq8064-v2.0.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064-v2.0.dtsi
@@ -32,6 +32,7 @@ &gsbi4 {
 	serial@16340000 {
 		status = "okay";
 	};
+
 	/*
 	 * The i2c device on gsbi4 should not be enabled.
 	 * On ipq806x designs gsbi4 i2c is meant for exclusive
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
index 1a278503d3401..2b3a3ec4e03d8 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
@@ -380,9 +380,11 @@ qfprom: efuse@700000 {
 			speedbin_efuse: speedbin@c0 {
 				reg = <0xc0 0x4>;
 			};
+
 			tsens_calib: calib@400 {
 				reg = <0x400 0xb>;
 			};
+
 			tsens_calib_backup: calib-backup@410 {
 				reg = <0x410 0xb>;
 			};
-- 
2.43.0