[PATCH v1 2/2] ARM: dts: imx6ull-colibri-iris: enable SPI

[Francesco Dolcini]

From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>

The Colibri SSP is routed to the X16 extension connector on the Iris
carrier board, and a device can be instantiated from user space through
the spi_master new_device sysfs interface, so enable the controller here
too, as the Colibri iMX7 Iris device tree already does.

Signed-off-by: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
---
 arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi
index bce6fbf230b3..5e408e54b335 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi
@@ -52,6 +52,11 @@ &adc1 {
 	status = "okay";
 };
 
+/* Colibri SSP */
+&ecspi1 {
+	status = "okay";
+};
+
 &gpio1 {
 	/*
 	 * uart25_tx_on turns the UART transceiver on. If one wants to turn the
-- 
2.47.3