Re: [PATCH 1/7] ARM: dts: axis: artpec6: avoid _ in node names

[Henrik Grimler]

Hi Krzysztof,

On Wed, Sep 30, 2026 at 07:24:43AM +0200, Krzysztof Kozlowski wrote:
> On 28/09/2026 14:04, Henrik Grimler wrote:
> > Node names should preferably not use _, use - instead. Fixes
> > dt-check-style strict mode warnings:
> > 
> >   axis/artpec6.dtsi:91: [node-name] node name "ext_clk" is using discouraged style
> >   axis/artpec6.dtsi:97: [node-name] node name "eth_phy_ref_clk" is using discouraged style
> >   axis/artpec6.dtsi:189: [node-name] node name "pcie_ep" is using discouraged style
> > 
> > Signed-off-by: Henrik Grimler <henrik.grimler@xxxxxxxx>
> > ---
> >  arch/arm/boot/dts/axis/artpec6.dtsi | 6 +++---
> >  1 file changed, 3 insertions(+), 3 deletions(-)
> > 
> > diff --git a/arch/arm/boot/dts/axis/artpec6.dtsi b/arch/arm/boot/dts/axis/artpec6.dtsi
> > index 037157e6c5ee..ce642dcc754e 100644
> > --- a/arch/arm/boot/dts/axis/artpec6.dtsi
> > +++ b/arch/arm/boot/dts/axis/artpec6.dtsi
> > @@ -88,13 +88,13 @@ scu@faf00000 {
> >  	};
> >  
> >  	/* Main external clock driving CPU and peripherals */
> > -	ext_clk: ext_clk {
> > +	ext_clk: ext-clk {
> 
> This will change the name of the clock. Did you verify that it is fine?

Good point, the clkctrl driver does not get the clk by this name, and I
have verified on the artpec6-devboard that it can still accesses the
clock without issues. Will add this information to the commit message.

Best regards,
Henrik Grimler

> Best regards,
> Krzysztof