[PATCH v14 06/16] cxl: Move HDM decoder helpers to built-in resource code
From: Srirangan Madhavan
Date: Thu Oct 01 2026 - 05:46:05 EST
Move the refactored HDM programming helpers and cxl_rwsem from hdm.c to
resource.c. Build resource.o under CONFIG_CXL_RESET so the helpers are
available to built-in PCI code when CXL_BUS is modular. Export only the
symbols used by cxl_core.
Signed-off-by: Srirangan Madhavan <smadhavan@xxxxxxxxxx>
---
drivers/cxl/Kconfig | 4 ++
drivers/cxl/core/Makefile | 1 +
drivers/cxl/core/hdm.c | 93 -------------------------------
drivers/cxl/core/resource.c | 106 ++++++++++++++++++++++++++++++++++++
4 files changed, 111 insertions(+), 93 deletions(-)
create mode 100644 drivers/cxl/core/resource.c
diff --git a/drivers/cxl/Kconfig b/drivers/cxl/Kconfig
index 80aeb0d556bd..0cd704670735 100644
--- a/drivers/cxl/Kconfig
+++ b/drivers/cxl/Kconfig
@@ -6,6 +6,7 @@ menuconfig CXL_BUS
select FW_UPLOAD
select PCI_DOE
select FIRMWARE_TABLE
+ select CXL_RESET
select NUMA_KEEP_MEMINFO if NUMA_MEMBLKS
select FWCTL if CXL_FEATURES
help
@@ -244,3 +245,6 @@ config CXL_ATL
depends on ACPI_PRMT && AMD_NB
endif
+
+config CXL_RESET
+ bool
diff --git a/drivers/cxl/core/Makefile b/drivers/cxl/core/Makefile
index ce7213818d3c..30470799e059 100644
--- a/drivers/cxl/core/Makefile
+++ b/drivers/cxl/core/Makefile
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_CXL_BUS) += cxl_core.o
+obj-$(CONFIG_CXL_RESET) += resource.o
obj-$(CONFIG_CXL_SUSPEND) += suspend.o
ccflags-y += -I$(srctree)/drivers/cxl
diff --git a/drivers/cxl/core/hdm.c b/drivers/cxl/core/hdm.c
index d3f21dfda146..629e3420ad0b 100644
--- a/drivers/cxl/core/hdm.c
+++ b/drivers/cxl/core/hdm.c
@@ -16,11 +16,6 @@
* for enumerating these registers and capabilities.
*/
-struct cxl_rwsem cxl_rwsem = {
- .region = __RWSEM_INITIALIZER(cxl_rwsem.region),
- .dpa = __RWSEM_INITIALIZER(cxl_rwsem.dpa),
-};
-
static int add_hdm_decoder(struct cxl_port *port, struct cxl_decoder *cxld)
{
int rc;
@@ -707,35 +702,6 @@ int cxl_dpa_alloc(struct cxl_endpoint_decoder *cxled, u64 size)
return devm_add_action_or_reset(&port->dev, cxl_dpa_release, cxled);
}
-static void cxld_set_interleave(struct cxl_decoder_config *config, u32 *ctrl)
-{
- u16 eig;
- u8 eiw;
-
- /*
- * Input validation ensures these warns never fire, but otherwise
- * suppress unititalized variable usage warnings.
- */
- if (WARN_ONCE(ways_to_eiw(config->interleave_ways, &eiw),
- "invalid interleave_ways: %d\n", config->interleave_ways))
- return;
- if (WARN_ONCE(granularity_to_eig(config->interleave_granularity, &eig),
- "invalid interleave_granularity: %d\n",
- config->interleave_granularity))
- return;
-
- u32p_replace_bits(ctrl, eig, CXL_HDM_DECODER0_CTRL_IG_MASK);
- u32p_replace_bits(ctrl, eiw, CXL_HDM_DECODER0_CTRL_IW_MASK);
- *ctrl |= CXL_HDM_DECODER0_CTRL_COMMIT;
-}
-
-static void cxld_set_type(struct cxl_decoder_config *config, u32 *ctrl)
-{
- u32p_replace_bits(ctrl,
- !!(config->target_type == CXL_DECODER_HOSTONLYMEM),
- CXL_HDM_DECODER0_CTRL_HOSTONLY);
-}
-
static void cxlsd_set_targets(struct cxl_switch_decoder *cxlsd, u64 *tgt)
{
struct cxl_dport **t = &cxlsd->target[0];
@@ -758,65 +724,6 @@ static void cxlsd_set_targets(struct cxl_switch_decoder *cxlsd, u64 *tgt)
*tgt |= FIELD_PREP(GENMASK_ULL(63, 56), t[7]->port_id);
}
-/*
- * Per CXL 2.0 8.2.5.12.20 Committing Decoder Programming, hardware must set
- * committed or error within 10ms, but just be generous with 20ms to account for
- * clock skew and other marginal behavior
- */
-#define COMMIT_TIMEOUT_MS 20
-int cxld_await_commit(void __iomem *hdm, int id)
-{
- u32 ctrl;
- int i;
-
- for (i = 0; i < COMMIT_TIMEOUT_MS; i++) {
- ctrl = readl(hdm + CXL_HDM_DECODER0_CTRL_OFFSET(id));
- if (FIELD_GET(CXL_HDM_DECODER0_CTRL_COMMIT_ERROR, ctrl)) {
- ctrl &= ~CXL_HDM_DECODER0_CTRL_COMMIT;
- writel(ctrl, hdm + CXL_HDM_DECODER0_CTRL_OFFSET(id));
- return -EIO;
- }
- if (FIELD_GET(CXL_HDM_DECODER0_CTRL_COMMITTED, ctrl))
- return 0;
- fsleep(1000);
- }
-
- return -ETIMEDOUT;
-}
-
-static void setup_hw_decoder(void __iomem *hdm,
- struct cxl_decoder_settings *settings)
-{
- struct cxl_decoder_config *config = &settings->config;
- int id = config->id;
- u64 target_or_skip_reg_val;
- u64 base, size;
- u32 ctrl;
-
- ctrl = readl(hdm + CXL_HDM_DECODER0_CTRL_OFFSET(id));
- cxld_set_interleave(config, &ctrl);
- cxld_set_type(config, &ctrl);
- base = config->hpa_range.start;
- size = range_len(&config->hpa_range);
- target_or_skip_reg_val = settings->target_or_skip_reg_val;
-
- writel(upper_32_bits(base), hdm + CXL_HDM_DECODER0_BASE_HIGH_OFFSET(id));
- writel(lower_32_bits(base), hdm + CXL_HDM_DECODER0_BASE_LOW_OFFSET(id));
- writel(upper_32_bits(size), hdm + CXL_HDM_DECODER0_SIZE_HIGH_OFFSET(id));
- writel(lower_32_bits(size), hdm + CXL_HDM_DECODER0_SIZE_LOW_OFFSET(id));
- /* Target-list and endpoint-skip registers alias the same slot. */
- writel(upper_32_bits(target_or_skip_reg_val), hdm + CXL_HDM_DECODER0_TL_HIGH(id));
- writel(lower_32_bits(target_or_skip_reg_val), hdm + CXL_HDM_DECODER0_TL_LOW(id));
-
- writel(ctrl, hdm + CXL_HDM_DECODER0_CTRL_OFFSET(id));
-}
-
-void cxl_commit_start(void __iomem *hdm, struct cxl_decoder_settings *settings)
-{
- lockdep_assert_held(&cxl_rwsem.dpa);
- setup_hw_decoder(hdm, settings);
-}
-
/*
* Endpoint skip and switch targets have different owners. Keep that state with
* its owning type and flatten it only into a transient register-programming
diff --git a/drivers/cxl/core/resource.c b/drivers/cxl/core/resource.c
new file mode 100644
index 000000000000..ff027cb89e57
--- /dev/null
+++ b/drivers/cxl/core/resource.c
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (c) 2026 NVIDIA Corporation & Affiliates */
+#include <linux/delay.h>
+#include <linux/bug.h>
+#include <linux/errno.h>
+#include <linux/export.h>
+#include <linux/kernel.h>
+
+#include "cxl.h"
+#include "core.h"
+
+struct cxl_rwsem cxl_rwsem = {
+ .region = __RWSEM_INITIALIZER(cxl_rwsem.region),
+ .dpa = __RWSEM_INITIALIZER(cxl_rwsem.dpa),
+};
+EXPORT_SYMBOL_FOR_MODULES(cxl_rwsem, "cxl_core");
+
+static void cxld_set_interleave(struct cxl_decoder_config *config, u32 *ctrl)
+{
+ u16 eig;
+ u8 eiw;
+
+ /*
+ * Input validation ensures these warns never fire, but otherwise
+ * suppress unititalized variable usage warnings.
+ */
+ if (WARN_ONCE(ways_to_eiw(config->interleave_ways, &eiw),
+ "invalid interleave_ways: %d\n", config->interleave_ways))
+ return;
+ if (WARN_ONCE(granularity_to_eig(config->interleave_granularity, &eig),
+ "invalid interleave_granularity: %d\n",
+ config->interleave_granularity))
+ return;
+
+ u32p_replace_bits(ctrl, eig, CXL_HDM_DECODER0_CTRL_IG_MASK);
+ u32p_replace_bits(ctrl, eiw, CXL_HDM_DECODER0_CTRL_IW_MASK);
+ *ctrl |= CXL_HDM_DECODER0_CTRL_COMMIT;
+}
+
+static void cxld_set_type(struct cxl_decoder_config *config, u32 *ctrl)
+{
+ u32p_replace_bits(ctrl,
+ !!(config->target_type == CXL_DECODER_HOSTONLYMEM),
+ CXL_HDM_DECODER0_CTRL_HOSTONLY);
+}
+
+/*
+ * Per CXL 2.0 8.2.5.12.20 Committing Decoder Programming, hardware must set
+ * committed or error within 10ms, but just be generous with 20ms to account for
+ * clock skew and other marginal behavior
+ */
+#define COMMIT_TIMEOUT_MS 20
+int cxld_await_commit(void __iomem *hdm, int id)
+{
+ u32 ctrl;
+ int i;
+
+ for (i = 0; i < COMMIT_TIMEOUT_MS; i++) {
+ ctrl = readl(hdm + CXL_HDM_DECODER0_CTRL_OFFSET(id));
+ if (FIELD_GET(CXL_HDM_DECODER0_CTRL_COMMIT_ERROR, ctrl)) {
+ ctrl &= ~CXL_HDM_DECODER0_CTRL_COMMIT;
+ writel(ctrl, hdm + CXL_HDM_DECODER0_CTRL_OFFSET(id));
+ return -EIO;
+ }
+ if (FIELD_GET(CXL_HDM_DECODER0_CTRL_COMMITTED, ctrl))
+ return 0;
+ fsleep(1000);
+ }
+
+ return -ETIMEDOUT;
+}
+EXPORT_SYMBOL_FOR_MODULES(cxld_await_commit, "cxl_core");
+
+static void setup_hw_decoder(void __iomem *hdm,
+ struct cxl_decoder_settings *settings)
+{
+ struct cxl_decoder_config *config = &settings->config;
+ int id = config->id;
+ u64 target_or_skip_reg_val;
+ u64 base, size;
+ u32 ctrl;
+
+ ctrl = readl(hdm + CXL_HDM_DECODER0_CTRL_OFFSET(id));
+ cxld_set_interleave(config, &ctrl);
+ cxld_set_type(config, &ctrl);
+ base = config->hpa_range.start;
+ size = range_len(&config->hpa_range);
+ target_or_skip_reg_val = settings->target_or_skip_reg_val;
+
+ writel(upper_32_bits(base), hdm + CXL_HDM_DECODER0_BASE_HIGH_OFFSET(id));
+ writel(lower_32_bits(base), hdm + CXL_HDM_DECODER0_BASE_LOW_OFFSET(id));
+ writel(upper_32_bits(size), hdm + CXL_HDM_DECODER0_SIZE_HIGH_OFFSET(id));
+ writel(lower_32_bits(size), hdm + CXL_HDM_DECODER0_SIZE_LOW_OFFSET(id));
+ /* Target-list and endpoint-skip registers alias the same slot. */
+ writel(upper_32_bits(target_or_skip_reg_val), hdm + CXL_HDM_DECODER0_TL_HIGH(id));
+ writel(lower_32_bits(target_or_skip_reg_val), hdm + CXL_HDM_DECODER0_TL_LOW(id));
+
+ writel(ctrl, hdm + CXL_HDM_DECODER0_CTRL_OFFSET(id));
+}
+
+void cxl_commit_start(void __iomem *hdm, struct cxl_decoder_settings *settings)
+{
+ lockdep_assert_held(&cxl_rwsem.dpa);
+ setup_hw_decoder(hdm, settings);
+}
+EXPORT_SYMBOL_FOR_MODULES(cxl_commit_start, "cxl_core");
--
2.43.0