[PATCH net-next v5 0/9] r8152: refactor and extend RTL8157/8159 support

[Chih Kai Hsu]

RTL8157 and RTL8159 have different init, enable, up/down, hw_phy_cfg,
and PHY access sequences from RTL8156.  This series splits the shared
callbacks into per-chip variants and adds the missing RTL8157/8159
functionality: dedicated unload and change_mtu callbacks, TGPHY register
access via phy_read/phy_write pointers in struct rtl_ops, flow control
patch support through rtl_fc_pause_pkt_en(), and UPS support via
r8157_ups_en().

v5:
- Patch #1: in r8157_init()/r8159_init(), call
  r8156b_wait_loading_flash() before wait_autoload_done(). Document
  in the commit message that the "Bulk In End" bit is cleared in
  r8157_init(), and drop the claim about the FC-timer block.

- Patch #2: accept the package read only if the full word was returned,
  warn when a retry was needed, and print an unknown package as
  0x%04x. Say "firmware" instead of "PHY tuning" in the commit
  message.

- Patch #3: make it a pure split with no functional change. Its
  register fixes move to the new patch #4.

- Patch #4 (new): fix up and down register settings for
  RTL8156/8156B/8157/8159.

- Patch #5: document the new RTL8159 PHY tuning parameters in the
  commit message.

- Patch #6: add Fixes tags.

- Patch #7:
  - A TGPHY busy timeout now sets RTL8152_INACCESSIBLE and returns
    -ENODEV.
  - sram_write() returns the data-write result.
  - The PHY firmware version checks, the BMCR reset poll,
    rtl8152_set_speed(), the pause parameters and the PHY patch
    handshake handle PHY access failures.
  - SIOCGMIIREG returns 0 with val_out set on success, or the error.
  - Commit message rewritten.

- Patch #8: drop the "no link" case, since the caller checks the link.
  An unknown speed now disarms the pause limit. Commit message
  rewritten.

- Patch #9: wait for the backup-restore flag with a timeout in
  r8157_ups_en(). Rename USB_FW_USE_VER to USB_FW_USB_VER.

v4:
- Patch #1: make wait_autoload_done() bail out immediately on
  RTL8152_INACCESSIBLE instead of waiting out the full 10 second
  timeout.
- Patch #6: propagate PHY access failures instead of ignoring them.
  ocp_reg_read()/ocp_reg_write() and every helper built on top of them
  (sram_read/write, sram2_read/write, the ocp_reg_*_bits and MDIO bit
  helpers) now return int and stop silently operating on stale data
  when a TGPHY access times out.

v3:
Rebase on top of latest net-next to resolve merge conflicts.

v2:
- For patch #1, use read_poll_timeout() to replace the manual
  for-loop polling.
- For patch #2 and #3, rewrite the commit message.

Chih Kai Hsu (9):
  r8152: split r8156_init per chip and add missing init writes
  r8152: split RTL_VER_17 into QFN68 and QFN100 package variants
  r8152: split rtl8156_enable/up/down into per-chip-family functions
  r8152: fix up and down register settings for RTL8156/8156B/8157/8159
  r8152: split r8157_hw_phy_cfg into RTL8157 and RTL8159 variants
  r8152: add rtl8157_unload and rtl8157_change_mtu
  r8152: add TGPHY register access for RTL8157 and RTL8159
  r8152: extract rtl_fc_pause_pkt_en() and apply it to RTL8156/8157/8159
  r8152: enable UPS for RTL8157 and RTL8159 QFN68

 drivers/net/usb/r8152.c | 1888 ++++++++++++++++++++++++++++++---------
 1 file changed, 1451 insertions(+), 437 deletions(-)

-- 
2.34.1