[PATCH 0/4] timers: Add support for RZ/N1 SoCs timers

[Herve Codina (Schneider Electric)]

The Renesas RZ/N1 SoCs family has two timers block controller
available.

Each controller is charge of 8 timers (six 16-bit timers + two 32-bit
timers).

Each timer has its own interrupt, its own prescaler that can be used to
device the clock by 25 (timers block are fed with a 25 MHz clock) and
all timers can work in either one-shot or periodic mode.

This series adds support for those timers blocks.

Best regards,
Hervé

Herve Codina (Schneider Electric) (4):
  dt-bindings: timer: Add the Renesas RZ/N1 timer
  clocksource/drivers: Add support for the Renesas RZ/N1 timers
  ARM: dts: r9a06g032: Add support for timers
  MAINTAINERS: Add the Renesas RZ/N1 timers driver entry

 .../bindings/timer/renesas,rzn1-timer.yaml    |  75 +++
 MAINTAINERS                                   |   7 +
 arch/arm/boot/dts/renesas/r9a06g032.dtsi      |  34 ++
 drivers/clocksource/Kconfig                   |  10 +
 drivers/clocksource/Makefile                  |   1 +
 drivers/clocksource/timer-rzn1.c              | 442 ++++++++++++++++++
 6 files changed, 569 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/timer/renesas,rzn1-timer.yaml
 create mode 100644 drivers/clocksource/timer-rzn1.c

-- 
2.53.0