Re: [PATCH net-next v4 08/10] selftests: drivers: hw: move to KTAP output

[Petr Machata]

Ioana Ciornei <ioana.ciornei@xxxxxxx> writes:

> Update the ethtool_rmon.sh test so that it uses the KTAP format for its
> output. This is achieved by using the helpers found in ktap_helpers.sh.
> An example output can be found below.
>
>  $ ./ethtool_rmon.sh endpmac3 endpmac4
>  TAP version 13
>  1..14
>  ok 1 ethtool_rmon.rx-pkts64to64
>  ok 2 ethtool_rmon.rx-pkts65to127
>  ok 3 ethtool_rmon.rx-pkts128to255
>  ok 4 ethtool_rmon.rx-pkts256to511
>  ok 5 ethtool_rmon.rx-pkts512to1023
>  ok 6 ethtool_rmon.rx-pkts1024to1518
>  ok 7 ethtool_rmon.rx-pkts1519to10240
>  ok 8 ethtool_rmon.tx-pkts64to64
>  ok 9 ethtool_rmon.tx-pkts65to127
>  ok 10 ethtool_rmon.tx-pkts128to255
>  ok 11 ethtool_rmon.tx-pkts256to511
>  ok 12 ethtool_rmon.tx-pkts512to1023
>  ok 13 ethtool_rmon.tx-pkts1024to1518
>  ok 14 ethtool_rmon.tx-pkts1519to10240
>  # Totals: pass:14 fail:0 xfail:0 xpass:0 skip:0 error:0
>
> Signed-off-by: Ioana Ciornei <ioana.ciornei@xxxxxxx>

Reviewed-by: Petr Machata <petrm@xxxxxxxxxx>