Re: [PATCH v2 1/3] arm64: dts: qcom: kaanapali: Add USB support for Kaanapali SoC
From: Jingyi Wang
Date: Sun Mar 29 2026 - 22:54:30 EST
On 3/30/2026 1:52 AM, Krishna Kurapati wrote:
From: Ronak Raheja <ronak.raheja@xxxxxxxxxxxxxxxx>
Add the base USB devicetree definitions for Kaanapali platform. The overall
chipset contains a single DWC3 USB3 controller (rev. 200a), SS QMP PHY
(rev. v8) and M31 eUSB2 PHY.
Signed-off-by: Ronak Raheja <ronak.raheja@xxxxxxxxxxxxxxxx>
Signed-off-by: Jingyi Wang <jingyi.wang@xxxxxxxxxxxxxxxx>
Signed-off-by: Krishna Kurapati <krishna.kurapati@xxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/kaanapali.dtsi | 154 ++++++++++++++++++++++++
1 file changed, 154 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/kaanapali.dtsi b/arch/arm64/boot/dts/qcom/kaanapali.dtsi
index ac6a6c789902..08d7c1a1d829 100644
--- a/arch/arm64/boot/dts/qcom/kaanapali.dtsi
+++ b/arch/arm64/boot/dts/qcom/kaanapali.dtsi
@@ -6026,6 +6026,160 @@ pdp_tx: scp-sram-section@100 {
reg = <0x100 0x80>;
};
};
+
+ usb_hsphy: phy@88e3000 {
+ compatible = "qcom,kaanapali-m31-eusb2-phy",
+ "qcom,sm8750-m31-eusb2-phy";
+ reg = <0x0 0x88e3000 0x0 0x29c>;
+
+ clocks = <&tcsr TCSR_USB2_CLKREF_EN>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_dp_qmpphy: phy@88e8000 {
+ compatible = "qcom,kaanapali-qmp-usb3-dp-phy",
+ "qcom,sm8750-qmp-usb3-dp-phy";
+ reg = <0x0 0x088e8000 0x0 0x4000>;
+
+ clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+ <&tcsr TCSR_USB3_CLKREF_EN>,
+ <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "com_aux",
+ "usb3_pipe";
+
+ resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+ <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+ reset-names = "phy",
+ "common";
+
+ power-domains = <&gcc GCC_USB3_PHY_GDSC>;
+
+ #clock-cells = <1>;
+ #phy-cells = <1>;
+
+ orientation-switch;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_dp_qmpphy_out: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_dp_qmpphy_usb_ss_in: endpoint {
+ remote-endpoint = <&usb_dwc3_ss>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ usb_dp_qmpphy_dp_in: endpoint {
+ };
+ };
+ };
+ };
+
+ usb: usb@a600000 {
+ compatible = "qcom,kaanapali-dwc3", "qcom,snps-dwc3";
+ reg = <0x0 0x0a600000 0x0 0xfc100>;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+ <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi";
+
+ assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "dwc_usb3",
+ "pwr_event",
+ "hs_phy_irq",
+ "dp_hs_phy_irq",
+ "dm_hs_phy_irq",
+ "ss_phy_irq";
+
+ power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+ interconnects = <&aggre_noc MASTER_USB3 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_USB3 QCOM_ICC_TAG_ACTIVE_ONLY>;
+ interconnect-names = "usb-ddr", "apps-usb";
+ iommus = <&apps_smmu 0x40 0x0>;
+
+ phys = <&usb_hsphy>, <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
+ phy-names = "usb2-phy", "usb3-phy";
+
+ snps,hird-threshold = /bits/ 8 <0x0>;
+ snps,usb2-gadget-lpm-disable;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ snps,dis-u1-entry-quirk;
+ snps,dis-u2-entry-quirk;
+ snps,is-utmi-l1-suspend;
+ snps,usb3_lpm_capable;
+ snps,usb2-lpm-disable;
+ snps,has-lpm-erratum;
+ tx-fifo-resize;
+ dma-coherent;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_dwc3_hs: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_dwc3_ss: endpoint {
+ remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
+ };
+ };
+ };
+ };
please make sure the nodes are sorted in address order.
Thanks,
Jingyi
};
thermal-zones {