[PATCH v3 0/3] arm64: Add HPE GSC platform support

[nick . hawkins]

From: Nick Hawkins <nick.hawkins@xxxxxxx>

Add initial platform support for the HPE GSC ARM64 BMC SoC.

Changes since v2:
- Patch 1: Removed separate ARM64/HPE GSC MAINTAINERS entry; instead
  renamed existing ARM/HPE GXP to ARM/HPE GXP/GSC and added arm64 DTS
  path there (Conor Dooley)
- Patch 2: Replaced menuconfig ARCH_HPE + nested ARCH_HPE_GSC with a
  single config ARCH_HPE; removed extra blank line (Krzysztof Kozlowski)
- Patch 3: Dropped clocks wrapper node, renamed fixed clock to
  clock-33333333; renamed ahb bus node to soc; reordered UART nodes by
  address for DTS coding style; replaced raw interrupt triplets with
  GIC_SPI/IRQ_TYPE_LEVEL_HIGH defines (Krzysztof Kozlowski)

Nick Hawkins (3):
  dt-bindings: arm: hpe,gxp: Add HPE GSC platform compatible
  arm64: Kconfig: Add ARCH_HPE platform
  arm64: dts: hpe: Add HPE GSC SoC and DL340 Gen12 board DTS

 .../devicetree/bindings/arm/hpe,gxp.yaml      |   7 +-
 MAINTAINERS                                   |   3 +-
 arch/arm64/Kconfig.platforms                  |  11 ++
 arch/arm64/boot/dts/hpe/Makefile              |   2 +
 arch/arm64/boot/dts/hpe/gsc-dl340gen12.dts    |  18 +++
 arch/arm64/boot/dts/hpe/gsc.dtsi              | 104 ++++++++++++++++++
 6 files changed, 143 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm64/boot/dts/hpe/Makefile
 create mode 100644 arch/arm64/boot/dts/hpe/gsc-dl340gen12.dts
 create mode 100644 arch/arm64/boot/dts/hpe/gsc.dtsi

-- 
2.34.1