Re: [PATCH 3/6] dt-bindings: phy: realtek,usb2phy.yaml: extend for resets and RTL9607C support

[Krzysztof Kozlowski]

On Fri, Mar 27, 2026 at 12:34:16AM +0500, Rustam Adilov wrote:
>  description: |
> -  Realtek USB 2.0 PHY support the digital home center (DHC) RTD series SoCs.
> +  Realtek USB 2.0 PHY support the digital home center (DHC) RTD and
> +  RTL9607C series SoCs.
>    The USB 2.0 PHY driver is designed to support the XHCI controller. The SoCs
>    support multiple XHCI controllers. One PHY device node maps to one XHCI
>    controller.
> +  This driver also supports the OCHI and EHCI controllers.

Hardware is fixed, does not change. Don't reference your driver changes
here.

>  
>    RTD1295/RTD1619 SoCs USB
>    The USB architecture includes three XHCI controllers.
> @@ -57,6 +59,12 @@ description: |
>    XHCI controller#1 -- usb2phy -- phy#0
>    XHCI controller#2 -- usb2phy -- phy#0
>  
> +  RTL9607C SoCs USB
> +  The USB architecture includes OHCI and EHCI controllers.
> +  Both of them map to one USB2.0 PHY.
> +  OHCI controller#0 -- usb2phy -- phy#0
> +  EHCI controller#0 -- usb2phy -- phy#0
> +
>  properties:
>    compatible:
>      enum:
> @@ -69,6 +77,7 @@ properties:
>        - realtek,rtd1395-usb2phy-2port
>        - realtek,rtd1619-usb2phy
>        - realtek,rtd1619b-usb2phy
> +      - realtek,rtl9607-usb2phy
>  
>    reg:
>      items:
> @@ -130,6 +139,9 @@ properties:
>      minimum: -8
>      maximum: 8
>  
> +  resets:
> +    maxItems: 1
> +
>  required:
>    - compatible
>    - reg
> @@ -157,6 +169,15 @@ allOf:
>      then:
>        properties:
>          realtek,driving-level-compensate: false
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - realtek,rtl9607-usb2phy
> +    then:
> +      required:
> +        - resets

If it is unclear, they might not have it so,

else: ... :false

see example-schema.

Best regards,
Krzysztof