[PATCH] arm64: dts: ti: k3-j7200: Fix QSGMII overlay by adding SERDES PHY

[Chintan Vankar]

For CPSW5G QSGMII ports, CPSW assumes SERDES to be configured. Since it
may not be always true, add SERDES phys to guarantee it.

Fixes: 496cdc82e05f ("arm64: dts: ti: k3-j7200: Add overlay to enable CPSW5G ports in QSGMII mode")
Signed-off-by: Chintan Vankar <c-vankar@xxxxxx>
---

This patch is based on commit "0138af2472df" of origin/master branch of
Linux repo.

 arch/arm64/boot/dts/ti/k3-j7200-evm-quad-port-eth-exp.dtso | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-evm-quad-port-eth-exp.dtso b/arch/arm64/boot/dts/ti/k3-j7200-evm-quad-port-eth-exp.dtso
index 6432ca08ee8e..4824d53c95bb 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-evm-quad-port-eth-exp.dtso
+++ b/arch/arm64/boot/dts/ti/k3-j7200-evm-quad-port-eth-exp.dtso
@@ -32,7 +32,8 @@ &cpsw0_port1 {
 	phy-handle = <&cpsw5g_phy0>;
 	phy-mode = "qsgmii";
 	mac-address = [00 00 00 00 00 00];
-	phys = <&cpsw0_phy_gmii_sel 1>;
+	phys = <&cpsw0_phy_gmii_sel 1>, <&serdes0_qsgmii_link>;
+	phy-names = "mac", "serdes";
 };
 
 &cpsw0_port2 {
-- 
2.34.1