Re: [PATCH v3 2/2] platform/x86: int3472: Add support for GPIO type 0x02 (strobe LED)

From: Ilpo Järvinen

Date: Thu Mar 26 2026 - 06:54:13 EST


On Wed, 25 Mar 2026, Marco Nenciarini wrote:

> Some ACPI INT3472 devices include a GPIO with DSM type 0x02, used for
> IR flood (strobe) illumination. This GPIO type was previously
> unhandled, resulting in the following warning during probe:
>
> int3472-discrete INT3472:00: GPIO type 0x02 is not currently
> supported
>
> Add INT3472_GPIO_TYPE_STROBE (0x02) handling that registers the GPIO
> as an LED class device via skl_int3472_register_led(). An enum
> int3472_led_type parameter controls both the LED name suffix and
> whether a lookup is registered for the sensor driver. Unlike the
> privacy LED, the strobe LED is not consumed by the sensor driver, so
> no LED lookup is registered.
>
> To support devices that have both a privacy and a strobe LED, the
> single struct int3472_led member is replaced with an array and the
> container_of in the brightness callback now references the int3472_led
> struct directly.
>
> Cc: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> Signed-off-by: Marco Nenciarini <mnencia@xxxxxxxx>
> ---
> Changes in v3:
> - Use enum int3472_led_type to control name and lookup behavior
> - Convert single LED member to array for multi-LED support
> - Add default: return -EINVAL for safety
>
> drivers/platform/x86/intel/int3472/discrete.c | 18 ++++-
> drivers/platform/x86/intel/int3472/led.c | 74 +++++++++++++------
> include/linux/platform_data/x86/int3472.h | 17 ++++-
> 3 files changed, 80 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/platform/x86/intel/int3472/discrete.c b/drivers/platform/x86/intel/int3472/discrete.c
> index cb24763..0cffd13 100644
> --- a/drivers/platform/x86/intel/int3472/discrete.c
> +++ b/drivers/platform/x86/intel/int3472/discrete.c
> @@ -207,6 +207,10 @@ static void int3472_get_con_id_and_polarity(struct int3472_discrete_device *int3
> *con_id = "powerdown";
> *gpio_flags = GPIO_ACTIVE_LOW;
> break;
> + case INT3472_GPIO_TYPE_STROBE:
> + *con_id = "strobe";
> + *gpio_flags = GPIO_ACTIVE_HIGH;
> + break;
> case INT3472_GPIO_TYPE_CLK_ENABLE:
> *con_id = "clk-enable";
> *gpio_flags = GPIO_ACTIVE_HIGH;
> @@ -248,6 +252,7 @@ static void int3472_get_con_id_and_polarity(struct int3472_discrete_device *int3
> *
> * 0x00 Reset
> * 0x01 Power down
> + * 0x02 Strobe (IR flood LED)
> * 0x0b Power enable
> * 0x0c Clock enable
> * 0x0d Privacy LED
> @@ -329,6 +334,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
> err_msg = "Failed to map GPIO pin to sensor\n";
>
> break;
> + case INT3472_GPIO_TYPE_STROBE:
> case INT3472_GPIO_TYPE_CLK_ENABLE:
> case INT3472_GPIO_TYPE_PRIVACY_LED:
> case INT3472_GPIO_TYPE_POWER_ENABLE:
> @@ -348,7 +354,15 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
>
> break;
> case INT3472_GPIO_TYPE_PRIVACY_LED:
> - ret = skl_int3472_register_led(int3472, gpio);
> + ret = skl_int3472_register_led(int3472, gpio,
> + INT3472_LED_TYPE_PRIVACY);
> + if (ret)
> + err_msg = "Failed to register LED\n";
> +
> + break;
> + case INT3472_GPIO_TYPE_STROBE:
> + ret = skl_int3472_register_led(int3472, gpio,
> + INT3472_LED_TYPE_STROBE);
> if (ret)
> err_msg = "Failed to register LED\n";
>
> @@ -422,7 +436,7 @@ void int3472_discrete_cleanup(struct int3472_discrete_device *int3472)
> gpiod_remove_lookup_table(&int3472->gpios);
>
> skl_int3472_unregister_clock(int3472);
> - skl_int3472_unregister_led(int3472);
> + skl_int3472_unregister_leds(int3472);
> skl_int3472_unregister_regulator(int3472);
> }
> EXPORT_SYMBOL_NS_GPL(int3472_discrete_cleanup, "INTEL_INT3472_DISCRETE");
> diff --git a/drivers/platform/x86/intel/int3472/led.c b/drivers/platform/x86/intel/int3472/led.c
> index 8b26929..de475db 100644
> --- a/drivers/platform/x86/intel/int3472/led.c
> +++ b/drivers/platform/x86/intel/int3472/led.c
> @@ -9,53 +9,79 @@
> static int int3472_led_set(struct led_classdev *led_cdev,
> enum led_brightness brightness)
> {
> - struct int3472_discrete_device *int3472 =
> - container_of(led_cdev, struct int3472_discrete_device, led.classdev);
> + struct int3472_led *led =
> + container_of(led_cdev, struct int3472_led, classdev);
>
> - gpiod_set_value_cansleep(int3472->led.gpio, brightness);
> + gpiod_set_value_cansleep(led->gpio, brightness);
> return 0;
> }
>
> int skl_int3472_register_led(struct int3472_discrete_device *int3472,
> - struct gpio_desc *gpio)
> + struct gpio_desc *gpio,
> + enum int3472_led_type type)
> {
> + struct int3472_led *led;
> + const char *name_suffix;
> + bool add_lookup;
> char *p;
> int ret;
>
> - if (int3472->led.classdev.dev)
> - return -EBUSY;
> + if (int3472->n_leds >= INT3472_MAX_LEDS)
> + return -ENOSPC;
>
> - int3472->led.gpio = gpio;
> + switch (type) {
> + case INT3472_LED_TYPE_PRIVACY:
> + name_suffix = "privacy";
> + add_lookup = true;
> + break;
> + case INT3472_LED_TYPE_STROBE:
> + name_suffix = "strobe";
> + add_lookup = false;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + led = &int3472->leds[int3472->n_leds];
> + led->gpio = gpio;
>
> /* Generate the name, replacing the ':' in the ACPI devname with '_' */
> - snprintf(int3472->led.name, sizeof(int3472->led.name),
> - "%s::privacy_led", acpi_dev_name(int3472->sensor));
> - p = strchr(int3472->led.name, ':');
> + snprintf(led->name, sizeof(led->name),
> + "%s::%s_led", acpi_dev_name(int3472->sensor), name_suffix);
> + p = strchr(led->name, ':');
> if (p)
> *p = '_';
>
> - int3472->led.classdev.name = int3472->led.name;
> - int3472->led.classdev.max_brightness = 1;
> - int3472->led.classdev.brightness_set_blocking = int3472_led_set;
> + led->classdev.name = led->name;
> + led->classdev.max_brightness = 1;
> + led->classdev.brightness_set_blocking = int3472_led_set;
>
> - ret = led_classdev_register(int3472->dev, &int3472->led.classdev);
> + ret = led_classdev_register(int3472->dev, &led->classdev);
> if (ret)
> return ret;

Could all these int3472->led. => led-> conversion be made in a separate
patch as well? I think it would reduce churn making the actual changes in
this patch stand out better.

>
> - int3472->led.lookup.provider = int3472->led.name;
> - int3472->led.lookup.dev_id = int3472->sensor_name;
> - int3472->led.lookup.con_id = "privacy";
> - led_add_lookup(&int3472->led.lookup);
> + if (add_lookup) {
> + led->lookup.provider = led->name;
> + led->lookup.dev_id = int3472->sensor_name;
> + led->lookup.con_id = name_suffix;
> + led_add_lookup(&led->lookup);
> + led->has_lookup = true;
> + }>
> + int3472->n_leds++;
> return 0;
> }
>
> -void skl_int3472_unregister_led(struct int3472_discrete_device *int3472)
> +void skl_int3472_unregister_leds(struct int3472_discrete_device *int3472)
> {
> - if (IS_ERR_OR_NULL(int3472->led.classdev.dev))
> - return;
> + unsigned int i;
> +
> + for (i = 0; i < int3472->n_leds; i++) {
> + struct int3472_led *led = &int3472->leds[i];
>
> - led_remove_lookup(&int3472->led.lookup);
> - led_classdev_unregister(&int3472->led.classdev);
> - gpiod_put(int3472->led.gpio);
> + if (led->has_lookup)
> + led_remove_lookup(&led->lookup);
> + led_classdev_unregister(&led->classdev);
> + gpiod_put(led->gpio);
> + }
> }
> diff --git a/include/linux/platform_data/x86/int3472.h b/include/linux/platform_data/x86/int3472.h
> index 7af6731..9893711 100644
> --- a/include/linux/platform_data/x86/int3472.h
> +++ b/include/linux/platform_data/x86/int3472.h
> @@ -23,6 +23,7 @@
> /* PMIC GPIO Types */
> #define INT3472_GPIO_TYPE_RESET 0x00
> #define INT3472_GPIO_TYPE_POWERDOWN 0x01
> +#define INT3472_GPIO_TYPE_STROBE 0x02
> #define INT3472_GPIO_TYPE_POWER_ENABLE 0x0b
> #define INT3472_GPIO_TYPE_CLK_ENABLE 0x0c
> #define INT3472_GPIO_TYPE_PRIVACY_LED 0x0d
> @@ -49,6 +50,7 @@
> #define GPIO_REGULATOR_OFF_ON_DELAY (2 * USEC_PER_MSEC)
>
> #define INT3472_LED_MAX_NAME_LEN 32
> +#define INT3472_MAX_LEDS 2
>
> #define CIO2_SENSOR_SSDB_MCLKSPEED_OFFSET 86
>
> @@ -68,6 +70,11 @@
> #define to_int3472_device(clk) \
> container_of(clk, struct int3472_discrete_device, clock)
>
> +enum int3472_led_type {
> + INT3472_LED_TYPE_PRIVACY,
> + INT3472_LED_TYPE_STROBE,
> +};
> +
> struct acpi_device;
> struct dmi_system_id;
> struct i2c_client;
> @@ -126,7 +133,9 @@ struct int3472_discrete_device {
> struct led_lookup_data lookup;
> char name[INT3472_LED_MAX_NAME_LEN];
> struct gpio_desc *gpio;
> - } led;
> + bool has_lookup;
> + } leds[INT3472_MAX_LEDS];
> + unsigned int n_leds;
>
> struct int3472_discrete_quirks quirks;
>
> @@ -160,7 +169,9 @@ int skl_int3472_register_regulator(struct int3472_discrete_device *int3472,
> const char *second_sensor);
> void skl_int3472_unregister_regulator(struct int3472_discrete_device *int3472);
>
> -int skl_int3472_register_led(struct int3472_discrete_device *int3472, struct gpio_desc *gpio);
> -void skl_int3472_unregister_led(struct int3472_discrete_device *int3472);
> +int skl_int3472_register_led(struct int3472_discrete_device *int3472,
> + struct gpio_desc *gpio,
> + enum int3472_led_type type);
> +void skl_int3472_unregister_leds(struct int3472_discrete_device *int3472);
>
> #endif
>

--
i.