[PATCH 1/3] Input: snvs_pwrkey - make use of dev_err_probe()

[Joy Zou]

Add dev_err_probe() at return path of probe() to support users to
identify issues easier.

Signed-off-by: Joy Zou <joy.zou@xxxxxxx>
---
 drivers/input/keyboard/snvs_pwrkey.c | 40 ++++++++++++++----------------------
 1 file changed, 15 insertions(+), 25 deletions(-)

diff --git a/drivers/input/keyboard/snvs_pwrkey.c b/drivers/input/keyboard/snvs_pwrkey.c
index 954055aaf6e29527f22f8129fd47ca17722e2bc9..836ab94c160615f4b0f645d9b9f85d54638c2624 100644
--- a/drivers/input/keyboard/snvs_pwrkey.c
+++ b/drivers/input/keyboard/snvs_pwrkey.c
@@ -124,17 +124,15 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
 	/* Get SNVS register Page */
 	np = pdev->dev.of_node;
 	if (!np)
-		return -ENODEV;
+		return dev_err_probe(&pdev->dev, -ENODEV, "Device tree node not found\n");
 
 	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata)
 		return -ENOMEM;
 
 	pdata->snvs = syscon_regmap_lookup_by_phandle(np, "regmap");
-	if (IS_ERR(pdata->snvs)) {
-		dev_err(&pdev->dev, "Can't get snvs syscon\n");
-		return PTR_ERR(pdata->snvs);
-	}
+	if (IS_ERR(pdata->snvs))
+		return dev_err_probe(&pdev->dev, PTR_ERR(pdata->snvs), "Can't get snvs syscon\n");
 
 	if (of_property_read_u32(np, "linux,keycode", &pdata->keycode)) {
 		pdata->keycode = KEY_POWER;
@@ -142,16 +140,15 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
 	}
 
 	clk = devm_clk_get_optional_enabled(&pdev->dev, NULL);
-	if (IS_ERR(clk)) {
-		dev_err(&pdev->dev, "Failed to get snvs clock (%pe)\n", clk);
-		return PTR_ERR(clk);
-	}
+	if (IS_ERR(clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(clk),
+				     "Failed to get snvs clock (%pe)\n", clk);
 
 	pdata->wakeup = of_property_read_bool(np, "wakeup-source");
 
 	pdata->irq = platform_get_irq(pdev, 0);
 	if (pdata->irq < 0)
-		return -EINVAL;
+		return dev_err_probe(&pdev->dev, -EINVAL, "Failed to get interrupt\n");
 
 	error = of_property_read_u32(np, "power-off-time-sec", &val);
 	if (!error) {
@@ -165,9 +162,8 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
 			bpt = (val / 5) - 1;
 			break;
 		default:
-			dev_err(&pdev->dev,
-				"power-off-time-sec %d out of range\n", val);
-			return -EINVAL;
+			return dev_err_probe(&pdev->dev, -EINVAL,
+					     "power-off-time-sec %d out of range\n", val);
 		}
 
 		regmap_update_bits(pdata->snvs, SNVS_LPCR_REG, SNVS_LPCR_BPT_MASK,
@@ -198,10 +194,8 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
 
 	/* input customer action to cancel release timer */
 	error = devm_add_action(&pdev->dev, imx_snvs_pwrkey_act, pdata);
-	if (error) {
-		dev_err(&pdev->dev, "failed to register remove action\n");
-		return error;
-	}
+	if (error)
+		return dev_err_probe(&pdev->dev, error, "failed to register remove action\n");
 
 	pdata->input = input;
 	platform_set_drvdata(pdev, pdata);
@@ -209,16 +203,12 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
 	error = devm_request_irq(&pdev->dev, pdata->irq,
 			       imx_snvs_pwrkey_interrupt,
 			       0, pdev->name, pdev);
-	if (error) {
-		dev_err(&pdev->dev, "interrupt not available.\n");
-		return error;
-	}
+	if (error)
+		return dev_err_probe(&pdev->dev, error, "interrupt not available.\n");
 
 	error = input_register_device(input);
-	if (error < 0) {
-		dev_err(&pdev->dev, "failed to register input device\n");
-		return error;
-	}
+	if (error < 0)
+		return dev_err_probe(&pdev->dev, error, "failed to register input device\n");
 
 	device_init_wakeup(&pdev->dev, pdata->wakeup);
 	error = dev_pm_set_wake_irq(&pdev->dev, pdata->irq);

-- 
2.37.1