Re: [PATCH v4 1/9] arm64: dts: amlogic: t7: Add eMMC, SD card and SDIO pinctrl nodes
From: Neil Armstrong
Date: Thu Mar 26 2026 - 05:12:53 EST
On 3/25/26 10:15, Ronald Claveau wrote:
These pinctrl nodes are required by the eMMC, SD card and SDIO drivers
to configure pin muxing at runtime.
- eMMC: control, 4-bit/8-bit data, data strobe and clock gate pins
- SD card: data, clock, command and clock gate pins
- SDIO: data, clock, command and clock gate pins
Signed-off-by: Ronald Claveau <linux-kernel-dev@xxxxxxxx>
---
arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi | 98 +++++++++++++++++++++++++++++
1 file changed, 98 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
index 6510068bcff92..016b5429c8d1b 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
@@ -250,6 +250,104 @@ gpio: bank@4000 {
#gpio-cells = <2>;
gpio-ranges = <&periphs_pinctrl 0 0 157>;
};
+
+ emmc_ctrl_pins: emmc-ctrl {
+ mux-0 {
+ groups = "emmc_cmd";
+ function = "emmc";
+ bias-pull-up;
+ };
+
+ mux-1 {
+ groups = "emmc_clk";
+ function = "emmc";
+ bias-disable;
+ };
+ };
+
+ emmc_data_4b_pins: emmc-data-4b {
+ mux-0 {
No need for "-0"
+ groups = "emmc_nand_d0",
+ "emmc_nand_d1",
+ "emmc_nand_d2",
+ "emmc_nand_d3";
+ function = "emmc";
+ bias-pull-up;
+ };
+ };
+
+ emmc_data_8b_pins: emmc-data-8b {
+ mux-0 {
No need for "-0"
+ groups = "emmc_nand_d0",
+ "emmc_nand_d1",
+ "emmc_nand_d2",
+ "emmc_nand_d3",
+ "emmc_nand_d4",
+ "emmc_nand_d5",
+ "emmc_nand_d6",
+ "emmc_nand_d7";
+ function = "emmc";
+ bias-pull-up;
+ };
+ };
+
+ emmc_ds_pins: emmc-ds {
+ mux {
+ groups = "emmc_nand_ds";
+ function = "emmc";
+ bias-pull-down;
+ };
+ };
+
+ emmc_clk_gate_pins: emmc-clk-gate {
+ mux {
+ groups = "GPIOB_8";
+ function = "gpio_periphs";
+ bias-pull-down;
+ };
+ };
+
+ sdcard_pins: sdcard {
+ mux {
+ groups = "sdcard_d0",
+ "sdcard_d1",
+ "sdcard_d2",
+ "sdcard_d3",
+ "sdcard_clk",
+ "sdcard_cmd";
+ function = "sdcard";
+ bias-pull-up;
+ };
+ };
+
+ sdcard_clk_gate_pins: sdcard-clk-gate {
+ mux {
+ groups = "GPIOC_4";
+ function = "gpio_periphs";
+ bias-pull-down;
+ };
+ };
+
+ sdio_pins: sdio {
+ mux-0 {
No need for "-0"
+ groups = "sdio_d0",
+ "sdio_d1",
+ "sdio_d2",
+ "sdio_d3",
+ "sdio_clk",
+ "sdio_cmd";
+ function = "sdio";
+ bias-pull-up;
+ };
+ };
+
+ sdio_clk_gate_pins: sdio-clk-gate {
+ mux {
+ groups = "GPIOX_4";
+ function = "gpio_periphs";
+ bias-pull-up;
+ };
+ };
};
gpio_intc: interrupt-controller@4080 {