[PATCH v2 12/12] arm64: dts: imx8mp-data-modul-edm-sbc: Correct PAD settings for PMIC_nINT

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@xxxxxxx>

PMIC_nINT is low level triggered, but the current PAD settings is
PE=0,PUE=0,FSEL_1_FAST_SLEW_RATE=1,SION=1. So PAD needs to be configured
as PULL UP with PULL Enable, no need SION. Correct it.

Fixes: 562d222f23f0f ("arm64: dts: imx8mp: Add support for Data Modul i.MX8M Plus eDM SBC")
Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
---
 arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
index 7e46537a22a01d6e66305394edcddd73fdf660da..cb28cf1cdd23fa945906e6f26f6036ceca496c5a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
@@ -1001,7 +1001,7 @@ MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_PDM_BIT_STREAM00	0x0
 	pinctrl_pmic: pmic-grp {
 		fsl,pins = <
 			/* PMIC_nINT */
-			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x40000090
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x1c0
 		>;
 	};
 

-- 
2.37.1