Re: [PATCH v6 0/4] Enable secondary USB controller in host mode

[Krzysztof Kozlowski]

On 26/03/2026 08:04, Swati Agarwal wrote:
>>> micro USB controller support on lemans EVK.
>>> https://lore.kernel.org/all/20260306091355.1178333-1-swati.agarwal@xxxxxxxxxxxxxxxx/
>>>
>>> There is no dependency of drivers on DT.
>>>
>>>>
>>>> Also, combining here USB is a no-go. Do not combine independent
>>>> patchsets into one patchset.
>>>>
>>>> I also do not see how you addressed my comments from previous version.
>>>> You never bothered to respond and I do not see them implemented.
>>>
>>> Apologies if i missed replying any comments.
>>> Regarding your comment on v3 series below:- GL3590 hub used in lemans
>>> EVK requires only 1.2V and 3.3V supplies for operation, confirmes the
>>> same from our internal HW team and update the same in thereafter patch
>>> sets.
>>> https://lore.kernel.org/all/20251220-economic-gay-firefly-1873a9@quoll/
>>
>> This does not address the feedback. I did not talk about Lemans EVK. I
>> don't even have its datasheet. We speak here about GL3590. I found at
>> least three supplies in datasheet. Your binding has only two.
> 
> Hi Krysztof,
> For HUB GL3590, there are three supplies which are VP10, VP33 and
> VP12. I have already used VP12 and VP33 in bindings. VP10 i have not
> mentioned since its internal supply and other two are external
> supplies to hub. VP10 is internal regulator and its pins just loop
> back. Regarding AVDD10 and AVDD33, so AVDD10 is internal power hub
> which is routed to several pins for different functions such as the
> PLL and AVDD33 is external power hub where the external 3.3V gets
> connected for multiple devices.

OK, I understand.

Best regards,
Krzysztof