Re: [PATCH 4/6] arm64: dts: qcom: kaanapali-mtp: Enable bluetooth and Wifi

[Zijun Hu]

On 3/26/2026 12:10 PM, Dmitry Baryshkov wrote:
>> 3/25/2026 7:40 PM, Dmitry Baryshkov wrote:
>>>> On 3/25/2026 3:08 PM, Dmitry Baryshkov wrote:
>>>>> On Wed, Mar 25, 2026 at 02:40:19PM +0800, Zijun Hu wrote:
>>>>>> On 3/24/2026 9:16 AM, Dmitry Baryshkov wrote:
>>>>>>>> +
>>>>>>>> +	wcn7850-pmu {
>>>>>>>> +		compatible = "qcom,wcn7850-pmu";
>>>>>>>> +
>>>>>>>> +		pinctrl-0 = <&bt_default>, <&sw_ctrl_default>, <&wlan_en>;
>>>>>>>> +		pinctrl-names = "default";
>>>>>>>> +
>>>>>>>> +		bt-enable-gpios = <&pmh0104_j_e1_gpios 5 GPIO_ACTIVE_HIGH>;
>>>>>>>> +		wlan-enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
>>>>>>> swctrl-gpios?
>>>>>> it is '<&sw_ctrl_default>' within 'pinctrl-0' above.
>>>>>> the input pin is not used by power sequencing driver.
>>>>>> just give it some default configurations here.
>>>>> Please don't mix hardware description and the driver. If the pin is
>>>>> wired, let's describe it in DT.
>>>>>
>>>> give comments about that pin in this dts file ?
>>>> or give a seperated patch to describe the pin in DT binding schema of "qcom,wcn7850-pmu"?
>>> It is there, as far as I remember.
>>>
>>> $ grep swctrl Documentation/devicetree/bindings/regulator/qcom,qca6390-pmu.yaml
>>>   swctrl-gpios:
>> swctrl-gpios may be not applicable for 'qcom,wcn7850-pmu' since there is no 'qcom,wcn7850-pmu' node
>> which configures 'swctrl-gpios' within upstream DT tree.
> It's a wrong way to check it.
> Instead follow these steps:
> - Is the pin defined in the datasheet?
datasheet define this pin SW_CTRL with description 
"Switch request to the external PMU between active and sleep mode"

> - Is the pin defined in the schema?

schema define property 'swctrl-gpios' with description
"GPIO line indicating the state of the clock supply to the BT module"

> - Is the pin wired in the hardware?
pin SW_CTRL is wired in hardware.

i have below confusions about 'swctrl-gpios' of 'qcom,wcn7850-pmu'
which WCN7850 pin is 'swctrl-gpios' mean for ?
Why to introduce 'swctrl-gpios' ?
what problem does it solve ?
how to solve the problem ?