Re: [PATCH] phy: renesas: rcar-gen3-usb2: Simplify ID/VBUS detection logic

From: Geert Uytterhoeven

Date: Tue Mar 24 2026 - 09:14:16 EST


Hi Prabhakar,

On Tue, 24 Mar 2026 at 13:16, Prabhakar <prabhakar.csengg@xxxxxxxxx> wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
>
> Read the USB2_ADPCTRL register once in rcar_gen3_check_id() and reuse
> the value instead of performing multiple MMIO reads.
>
> Simplify the return logic by comparing the IDDIG and VBUSVALID bits
> directly. This preserves the existing behaviour while improving code
> clarity and avoiding redundant register accesses.
>
> Reported-by: Pavel Machek <pavel@xxxxxxxxxxxx>
> Closes: https://lore.kernel.org/all/acJV-Xq-2uq_JFMn@xxxxxxxxxx/
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>

Thanks for your patch!

> --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
> +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
> @@ -314,13 +314,14 @@ static void rcar_gen3_init_from_a_peri_to_a_host(struct rcar_gen3_chan *ch)
> static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch)
> {
> if (ch->phy_data->vblvl_ctrl) {
> + u32 val = readl(ch->base + USB2_ADPCTRL);
> bool vbus_valid;
> bool device;
>
> - device = !!(readl(ch->base + USB2_ADPCTRL) & USB2_ADPCTRL_IDDIG);
> - vbus_valid = !!(readl(ch->base + USB2_ADPCTRL) & USB2_ADPCTRL_VBUSVALID);
> + device = !!(val & USB2_ADPCTRL_IDDIG);
> + vbus_valid = !!(val & USB2_ADPCTRL_VBUSVALID);

Perhaps combine variable declarations and assignments?
The "!!" is not needed when assigning to a bool.

>
> - return vbus_valid ? device : !device;
> + return device == vbus_valid;
> }
>
> if (!ch->uses_otg_pins)

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds