[PATCH] usb: dwc2: gadget: Fix spin_lock/unlock mismatch in dwc2_hsotg_udc_stop()

[juno.choi]

From: Juno Choi <juno.choi@xxxxxxx>

dwc2_gadget_exit_clock_gating() internally calls call_gadget() macro,
which expects hsotg->lock to be held since it does spin_unlock/spin_lock
around the gadget driver callback invocation.

However, dwc2_hsotg_udc_stop() calls dwc2_gadget_exit_clock_gating()
without holding the lock. This leads to:
 - spin_unlock on a lock that is not held (undefined behavior)
 - The lock remaining held after dwc2_gadget_exit_clock_gating() returns,
   causing a deadlock when spin_lock_irqsave() is called later in the
   same function.

Fix this by acquiring hsotg->lock before calling
dwc2_gadget_exit_clock_gating() and releasing it afterwards, which
satisfies the locking requirement of the call_gadget() macro.

Fixes: af076a41f8a2 ("usb: dwc2: also exit clock_gating when stopping udc while suspended")
Cc: stable@xxxxxxxxxx
Signed-off-by: Juno Choi <juno.choi@xxxxxxx>
---
 drivers/usb/dwc2/gadget.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 834fc02610a2..e88683b1268f 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -4607,7 +4607,9 @@ static int dwc2_hsotg_udc_stop(struct usb_gadget *gadget)
 	/* Exit clock gating when driver is stopped. */
 	if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_NONE &&
 	    hsotg->bus_suspended && !hsotg->params.no_clock_gating) {
+		spin_lock_irqsave(&hsotg->lock, flags);
 		dwc2_gadget_exit_clock_gating(hsotg, 0);
+		spin_unlock_irqrestore(&hsotg->lock, flags);
 	}
 
 	/* all endpoints should be shutdown */
-- 
2.34.1