Re: [PATCH v2 3/4] iio: adc: xilinx-xadc: Add I2C interface support

[Jonathan Cameron]

On Mon, 23 Mar 2026 13:15:04 +0530
Sai Krishna Potthuri <sai.krishna.potthuri@xxxxxxx> wrote:

> Add I2C interface support for Xilinx System Management Wizard IP along
> with the existing AXI memory-mapped interface. This support enables
> monitoring the voltage and temperature on UltraScale+ devices where the
> System Management Wizard is connected via I2C.
> 
> Key changes:
> - Implement 32-bit DRP(Dynamic Reconfiguration Port) packet format as per
>   Xilinx PG185 specification.
> - Add separate I2C probe with xadc_i2c_of_match_table to handle same
>   compatible string("xlnx,system-management-wiz-1.3") on I2C bus.
> - Implement delayed version of hardware initialization for I2C interface
>   to handle the case where System Management Wizard IP is not ready during
>   the I2C probe.
> - Add NULL checks for get_dclk_rate callback function in sampling rate
>   functions to support interfaces without clock control
> - Create separate iio_info structure(xadc_i2c_info) without event
>   callbacks for I2C devices
> - Add xadc_i2c_transaction() function to handle I2C read/write operations
> - Add XADC_TYPE_US_I2C type to distinguish I2C interface from AXI
> 
> Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@xxxxxxx>
Hi.
A few minor things inline.

Thanks,

Jonathan

> ---
>  drivers/iio/adc/Kconfig            |  15 ++
>  drivers/iio/adc/Makefile           |   1 +
>  drivers/iio/adc/xilinx-xadc-core.c |  28 +++-
>  drivers/iio/adc/xilinx-xadc-i2c.c  | 215 +++++++++++++++++++++++++++++
>  drivers/iio/adc/xilinx-xadc.h      |   1 +
>  5 files changed, 256 insertions(+), 4 deletions(-)
>  create mode 100644 drivers/iio/adc/xilinx-xadc-i2c.c
> 
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index a4a7556f4016..5a3956a5c086 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -1767,6 +1767,21 @@ config XILINX_XADC
>  	  The driver can also be build as a module. If so, the module will be called
>  	  xilinx-xadc.
>  
> +config XILINX_XADC_I2C
> +	tristate "Xilinx System Management Wizard I2C Interface support"
> +	depends on I2C
> +	select XILINX_XADC_CORE
> +	help
> +	  Say yes here to allow accessing the System Management
> +	  Wizard on UltraScale+ devices via I2C.
> +
> +	  This provides voltage and temperature monitoring capabilities
> +	  through the same IIO sysfs interface, but using I2C communication
> +	  protocol.
> +
> +	  The driver can also be build as a module. If so, the module will be called

line is a little too long for Kconfig.

> +	  xilinx-xadc-i2c.
> +
>
> diff --git a/drivers/iio/adc/xilinx-xadc-i2c.c b/drivers/iio/adc/xilinx-xadc-i2c.c
> new file mode 100644
> index 000000000000..3d802b907260
> --- /dev/null
> +++ b/drivers/iio/adc/xilinx-xadc-i2c.c
> @@ -0,0 +1,215 @@

> +static int xadc_i2c_read_transaction(struct xadc *xadc, unsigned int reg, u16 *val)
> +{
> +	struct xadc_i2c *xadc_i2c = container_of(xadc, struct xadc_i2c, xadc);
> +	char write_buffer[XADC_I2C_WRITE_DATA_SIZE] = { 0 };
> +	struct i2c_client *client = xadc_i2c->client;
> +	char read_buffer[XADC_I2C_READ_DATA_SIZE];
> +	int ret;
> +
> +	write_buffer[2] = FIELD_GET(XADC_I2C_DRP_ADDR_MASK, reg);
> +	write_buffer[3] = XADC_I2C_INSTR_READ;
> +
> +	ret = i2c_master_send(client, write_buffer, XADC_I2C_WRITE_DATA_SIZE);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = i2c_master_recv(client, read_buffer, XADC_I2C_READ_DATA_SIZE);
> +	if (ret < 0)
> +		return ret;
> +
> +	*val = FIELD_PREP(XADC_I2C_DRP_DATA0_MASK, read_buffer[0]) |
> +	       FIELD_PREP(XADC_I2C_DRP_DATA1_MASK, read_buffer[1]);
> +
> +	return 0;
> +}
> +
> +static int xadc_i2c_write_transaction(struct xadc *xadc, unsigned int reg, u16 val)
> +{
> +	struct xadc_i2c *xadc_i2c = container_of(xadc, struct xadc_i2c, xadc);
> +	struct i2c_client *client = xadc_i2c->client;
> +	char write_buffer[XADC_I2C_WRITE_DATA_SIZE];
> +	int ret;
> +
> +	write_buffer[0] = FIELD_GET(XADC_I2C_DRP_DATA0_MASK, val);
> +	write_buffer[1] = FIELD_GET(XADC_I2C_DRP_DATA1_MASK, val);

This is odd enough it might be useful to have some comments.  Why do
we need to write the value to two places for instance?

> +	write_buffer[2] = FIELD_GET(XADC_I2C_DRP_ADDR_MASK, reg);
> +	write_buffer[3] = XADC_I2C_INSTR_WRITE;
> +
> +	ret = i2c_master_send(client, write_buffer, XADC_I2C_WRITE_DATA_SIZE);
> +	if (ret < 0)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +static int xadc_hardware_init(struct xadc *xadc)
> +{
> +	struct xadc_i2c *xadc_i2c = container_of(xadc, struct xadc_i2c, xadc);
> +	int ret;
> +	u32 i;
> +
> +	for (i = 0; i < ARRAY_SIZE(xadc->threshold); i++) {
	for (u32 i = 0;

Though why a u32?  If size doesn't matter, convention is pretty much always
use a unsigned int for the iterator.

> +		ret = xadc_i2c_read_transaction(xadc, XADC_REG_THRESHOLD(i),
> +						&xadc->threshold[i]);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	ret = xadc_i2c_write_transaction(xadc, XADC_REG_CONF0, xadc_i2c->conf0);
> +	if (ret)
> +		return ret;
> +
> +	ret = xadc_i2c_write_transaction(xadc, XADC_REG_INPUT_MODE(0),
> +					 xadc_i2c->bipolar_mask);
> +	if (ret)
> +		return ret;
> +
> +	ret = xadc_i2c_write_transaction(xadc, XADC_REG_INPUT_MODE(1),
> +					 xadc_i2c->bipolar_mask >> XADC_INPUT_MODE_BITS);
> +	if (ret)
> +		return ret;
> +
> +	xadc_i2c->hw_initialized = true;
> +
> +	return 0;
> +}
> +
> +static int xadc_i2c_read_reg(struct xadc *xadc, unsigned int reg, u16 *val)
> +{
> +	struct xadc_i2c *xadc_i2c = container_of(xadc, struct xadc_i2c, xadc);
> +
> +	if (!xadc_i2c->hw_initialized) {
> +		int ret;
> +
> +		ret = xadc_hardware_init(xadc);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	return xadc_i2c_read_transaction(xadc, reg, val);
> +}
> +
> +static int xadc_i2c_write_reg(struct xadc *xadc, unsigned int reg, u16 val)
> +{
> +	struct xadc_i2c *xadc_i2c = container_of(xadc, struct xadc_i2c, xadc);
> +
> +	if (!xadc_i2c->hw_initialized) {

Seems like this is always called once on first access?
If so just do it form probe and simplify the read/ write_reg() functions.

> +		int ret;
> +
> +		ret = xadc_hardware_init(xadc);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	return xadc_i2c_write_transaction(xadc, reg, val);
> +}

> +static int xadc_i2c_probe(struct i2c_client *client)
> +{
> +	struct device *dev = &client->dev;
> +	unsigned int conf0, bipolar_mask;
> +	const struct xadc_ops *ops;
> +	struct iio_dev *indio_dev;
> +	struct xadc_i2c *xadc_i2c;
> +	struct xadc *xadc;
> +	int ret;
> +
> +	indio_dev = xadc_device_setup(dev, sizeof(*xadc_i2c), &ops);
> +	if (IS_ERR(indio_dev))
> +		return PTR_ERR(indio_dev);
> +
> +	xadc_i2c = iio_priv(indio_dev);
> +	xadc_i2c->client = client;
> +	xadc = &xadc_i2c->xadc;
> +	xadc->clk = NULL;
> +	xadc->ops = ops;
> +	mutex_init(&xadc->mutex);
For new code (feel free to update the other code in a separate patch).
	ret = devm_mutex_init(xadc->mutex);
	if (ret)
		return ret;

As gives a small amount of lock debugging infrastructure and is now
cheap to do.  The devm form didn't used to exist.

> +	spin_lock_init(&xadc->lock);
> +
> +	ret = xadc_device_configure(dev, indio_dev, 0, &conf0, &bipolar_mask);
> +	if (ret) {
> +		dev_err(dev, "Failed to setup the device: %d\n", ret);
> +		return ret;
		return dev_err_probe(dev, "Failed to setup the device.\n");
Which will pretty print the error and hide it if -EPROBEDEFER (because that should
be silent) or -ENOMEM (because memory allocation errors are very noisy anyway!)

> +	}
> +
> +	i2c_set_clientdata(client, indio_dev);
> +	xadc_i2c->conf0 = conf0;
> +	xadc_i2c->bipolar_mask = bipolar_mask;
> +	xadc_i2c->hw_initialized = false;
> +
> +	return devm_iio_device_register(dev, indio_dev);
> +}