[PATCH 1/3] arm64: dts: qcom: sdm845-shift-axolotl: Enable sdcard

[David Heidelberg via B4 Relay]

From: Casey Connolly <casey.connolly@xxxxxxxxxx>

The SHIFT6mq features an sdcard slot, add it.

Signed-off-by: Casey Connolly <casey.connolly@xxxxxxxxxx>
Signed-off-by: David Heidelberg <david@xxxxxxx>
---
 arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts | 43 +++++++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
index 51b041f91d3e2..1f21da310b762 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
@@ -600,6 +600,23 @@ &qupv3_id_1 {
 	status = "okay";
 };
 
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
+
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vreg_l13a_2p95>;
+
+	bus-width = <4>;
+	/* card detection is broken, but because the battery must be removed
+	 * to insert the card, we use this rather than the broken-cd property
+	 * which would just waste CPU cycles polling.
+	 */
+	non-removable;
+};
+
 &slpi_pas {
 	firmware-name = "qcom/sdm845/SHIFT/axolotl/slpi.mbn";
 
@@ -609,6 +626,32 @@ &slpi_pas {
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <81 4>;
 
+	sdc2_default_state: sdc2-default-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+	};
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio126";
+		function = "gpio";
+		bias-pull-up;
+	};
+
 	sde_dsi_active: sde-dsi-active-state {
 		pins = "gpio6", "gpio11";
 		function = "gpio";

-- 
2.53.0