[PATCH 4/5] media: ipu-bridge: add sensor configuration for OV8858 (INT3477)

[Thierry Chatard]

The Omnivision OV8858 is used as the rear camera in several Intel
IPU3-based devices (e.g. Dell Latitude 5285 2-in-1). Its ACPI HID is
INT3477. Add a sensor configuration entry with a link frequency of
360 MHz to allow ipu_bridge to create the firmware node for this sensor.

Signed-off-by: Thierry Chatard <tchatard@xxxxxxxxx>
---
 drivers/media/pci/intel/ipu-bridge.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/media/pci/intel/ipu-bridge.c b/drivers/media/pci/intel/ipu-bridge.c
index fc6608e33..f51749d0f 100644
--- a/drivers/media/pci/intel/ipu-bridge.c
+++ b/drivers/media/pci/intel/ipu-bridge.c
@@ -63,6 +63,8 @@ static const struct ipu_sensor_config ipu_supported_sensors[] = {
 	IPU_SENSOR_CONFIG("INT33F0", 1, 384000000),
 	/* Omnivision OV2740 */
 	IPU_SENSOR_CONFIG("INT3474", 1, 180000000),
+	/* Omnivision OV8858 */
+	IPU_SENSOR_CONFIG("INT3477", 1, 360000000),
 	/* Omnivision OV5670 */
 	IPU_SENSOR_CONFIG("INT3479", 1, 422400000),
 	/* Omnivision OV8865 */
-- 
2.51.0