[PATCH v7 01/10] x86/bhi: x86/vmscape: Move LFENCE out of clear_bhb_loop()

From: Pawan Gupta

Date: Thu Mar 19 2026 - 11:41:42 EST


Currently, BHB clearing sequence is followed by an LFENCE to prevent
transient execution of subsequent indirect branches prematurely. However,
LFENCE barrier could be unnecessary in certain cases. For example, when
kernel is using BHI_DIS_S mitigation, and BHB clearing is only needed for
userspace. In such cases, LFENCE is redundant because ring transitions
would provide the necessary serialization.

Below is a quick recap of BHI mitigation options:

On Alder Lake and newer

- BHI_DIS_S: Hardware control to mitigate BHI in ring0. This has low
performance overhead.
- Long loop: Alternatively, longer version of BHB clearing sequence
can be used to mitigate BHI. It can also be used to mitigate
BHI variant of VMSCAPE. This is not yet implemented in
Linux.

On older CPUs

- Short loop: Clears BHB at kernel entry and VMexit. The "Long loop" is
effective on older CPUs as well, but should be avoided
because of unnecessary overhead.

On Alder Lake and newer CPUs, eIBRS isolates the indirect targets between
guest and host. But when affected by the BHI variant of VMSCAPE, a guest's
branch history may still influence indirect branches in userspace. This
also means the big hammer IBPB could be replaced with a cheaper option that
clears the BHB at exit-to-userspace after a VMexit.

In preparation for adding the support for BHB sequence (without LFENCE) on
newer CPUs, move the LFENCE to the caller side after clear_bhb_loop() is
executed. Allow callers to decide whether they need the LFENCE or
not. This adds a few extra bytes to the call sites, but it obviates
the need for multiple variants of clear_bhb_loop().

Suggested-by: Dave Hansen <dave.hansen@xxxxxxxxxxxxxxx>
Reviewed-by: Nikolay Borisov <nik.borisov@xxxxxxxx>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@xxxxxxxxxxxxxxx>
---
arch/x86/entry/entry_64.S | 5 ++++-
arch/x86/include/asm/nospec-branch.h | 4 ++--
arch/x86/net/bpf_jit_comp.c | 2 ++
3 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index 42447b1e1dff..3a180a36ca0e 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -1528,6 +1528,9 @@ SYM_CODE_END(rewind_stack_and_make_dead)
* refactored in the future if needed. The .skips are for safety, to ensure
* that all RETs are in the second half of a cacheline to mitigate Indirect
* Target Selection, rather than taking the slowpath via its_return_thunk.
+ *
+ * Note, callers should use a speculation barrier like LFENCE immediately after
+ * a call to this function to ensure BHB is cleared before indirect branches.
*/
SYM_FUNC_START(clear_bhb_loop)
ANNOTATE_NOENDBR
@@ -1562,7 +1565,7 @@ SYM_FUNC_START(clear_bhb_loop)
sub $1, %ecx
jnz 1b
.Lret2: RET
-5: lfence
+5:
pop %rbp
RET
SYM_FUNC_END(clear_bhb_loop)
diff --git a/arch/x86/include/asm/nospec-branch.h b/arch/x86/include/asm/nospec-branch.h
index 4f4b5e8a1574..70b377fcbc1c 100644
--- a/arch/x86/include/asm/nospec-branch.h
+++ b/arch/x86/include/asm/nospec-branch.h
@@ -331,11 +331,11 @@

#ifdef CONFIG_X86_64
.macro CLEAR_BRANCH_HISTORY
- ALTERNATIVE "", "call clear_bhb_loop", X86_FEATURE_CLEAR_BHB_LOOP
+ ALTERNATIVE "", "call clear_bhb_loop; lfence", X86_FEATURE_CLEAR_BHB_LOOP
.endm

.macro CLEAR_BRANCH_HISTORY_VMEXIT
- ALTERNATIVE "", "call clear_bhb_loop", X86_FEATURE_CLEAR_BHB_VMEXIT
+ ALTERNATIVE "", "call clear_bhb_loop; lfence", X86_FEATURE_CLEAR_BHB_VMEXIT
.endm
#else
#define CLEAR_BRANCH_HISTORY
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index e9b78040d703..63d6c9fa5e80 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -1624,6 +1624,8 @@ static int emit_spectre_bhb_barrier(u8 **pprog, u8 *ip,

if (emit_call(&prog, func, ip))
return -EINVAL;
+ /* Don't speculate past this until BHB is cleared */
+ EMIT_LFENCE();
EMIT1(0x59); /* pop rcx */
EMIT1(0x58); /* pop rax */
}

--
2.34.1