Re: [PATCH v5 1/8] dt-bindings: iio: light: vcnl4000: add regulators

[Rob Herring (Arm)]

On Thu, 19 Mar 2026 13:58:39 +0200, Erikas Bitovtas wrote:
> These sensors can accept 2 supplies - one for the sensor and one for IR
> LED [1]. Add supply properties for the sensor - 2 for the sensors and
> one external, for their open drain interrupt line, to ensure the sensor
> is powered on before proceeding with setup.
> 
> [1] https://www.vishay.com/docs/84274/vcnl4040.pdf
> 
> Reviewed-by: David Lechner <dlechner@xxxxxxxxxxxx>
> Signed-off-by: Erikas Bitovtas <xerikasxx@xxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml | 7 +++++++
>  1 file changed, 7 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.example.dtb: light-sensor@51 (vishay,vcnl4200): 'vddio-supply' does not match any of the regexes: '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/iio/light/vishay,vcnl4000.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.kernel.org/project/devicetree/patch/20260319-vcnl4000-regulators-v5-1-a025d3332805@xxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.