[PATCH v2] Bluetooth: hci_qca: disable power control for WCN7850 when bt_en is not defined
From: Shuai Zhang
Date: Thu Mar 19 2026 - 03:52:10 EST
On platforms using an M.2 slot with both UART and USB support, bt_en is
pulled high by hardware. In this case, software-based power control
should be disabled. The current platforms are Lemans-EVK and Monaco-EVK.
Add QCA_WCN7850 to the existing condition so that power_ctrl_enabled is
cleared when bt_en is not software-controlled (or absent), aligning its
behavior with WCN6750 and WCN6855
Signed-off-by: Shuai Zhang <shuai.zhang@xxxxxxxxxxxxxxxx>
---
drivers/bluetooth/hci_qca.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index c17a462aef55..4512ff7cd0c0 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -2484,7 +2484,8 @@ static int qca_serdev_probe(struct serdev_device *serdev)
if (!qcadev->bt_en &&
(data->soc_type == QCA_WCN6750 ||
- data->soc_type == QCA_WCN6855))
+ data->soc_type == QCA_WCN6855 ||
+ data->soc_type == QCA_WCN7850))
power_ctrl_enabled = false;
qcadev->sw_ctrl = devm_gpiod_get_optional(&serdev->dev, "swctrl",
--
2.34.1