Re: [PATCH v1] Bluetooth: hci_qca: disable power control for WCN7850 when bt_en is not defined

From: Shuai Zhang

Date: Thu Mar 19 2026 - 01:23:10 EST

Hi  Dmitry

On 3/19/2026 11:51 AM, Dmitry Baryshkov wrote:
On Thu, Mar 19, 2026 at 11:10:40AM +0800, Shuai Zhang wrote:
For platforms where the bt_en GPIO is not defined, software-based power
control should be disabled when power is managed by hardware.
What does it mean for this chip, managing the power in hardware?

bt_en is pulled high by hardware, or described in the device tree as a regular always-on GPIO.


Add QCA_WCN7850 to the existing condition so that power_ctrl_enabled is
cleared when bt_en is absent, aligning its behavior with WCN6750 and
WCN6855.

Signed-off-by: Shuai Zhang <shuai.zhang@xxxxxxxxxxxxxxxx>
---
drivers/bluetooth/hci_qca.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index c17a462aef55..4512ff7cd0c0 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -2484,7 +2484,8 @@ static int qca_serdev_probe(struct serdev_device *serdev)
if (!qcadev->bt_en &&
(data->soc_type == QCA_WCN6750 ||
- data->soc_type == QCA_WCN6855))
+ data->soc_type == QCA_WCN6855 ||
+ data->soc_type == QCA_WCN7850))
power_ctrl_enabled = false;
qcadev->sw_ctrl = devm_gpiod_get_optional(&serdev->dev, "swctrl",
--
2.34.1