[PATCH v2 0/6] Enable new features for flipkart-rimob

[Cristian Cozzolino via B4 Relay]

This series enables a set of miscellaneous features for Billion Capture+ 
(a handset using the MSM8953 SoC released in 2017):
- Panel and GPU
- Touchscreen
- WiFi + Bluetooth
- Hall sensor 

Patches 1 and 2 provide a driver for Novatek NT35532 and its corresponding
devicetree bindings, required for enabling panel in DTS. The remaining 
patches are all DTS changes, aimed to enable the features listed above.

To: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
To: Jessica Zhang <jesszhan0024@xxxxxxxxx>
To: David Airlie <airlied@xxxxxxxxx>
To: Simona Vetter <simona@xxxxxxxx>
To: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
To: Maxime Ripard <mripard@xxxxxxxxxx>
To: Thomas Zimmermann <tzimmermann@xxxxxxx>
To: Rob Herring <robh@xxxxxxxxxx>
To: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>
To: Conor Dooley <conor+dt@xxxxxxxxxx>
To: Bjorn Andersson <andersson@xxxxxxxxxx>
To: Konrad Dybcio <konradybcio@xxxxxxxxxx>
Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
Cc: linux-arm-msm@xxxxxxxxxxxxxxx
Cc: ~postmarketos/upstreaming@xxxxxxxxxxx
Cc: phone-devel@xxxxxxxxxxxxxxx 

Signed-off-by: Cristian Cozzolino <cristian_ci@xxxxxxxxxxxxxx>
---
Changes in v2:
- (patch 1/6): define power supplies in the bindings as per datasheet  
  and update example;
- (patch 2/6): add blank lines where required between mipi dsi write
  sequences in nt35532_on() function and make use of names for mipi dcs
  commands, instead of hex numbers, to improve readibility (Dmitry); 
- (patch 3/6): move pinctrl lines ibto panel node and get rid of
  sleep/reset state, since panel just uses one pinctrl state for
  default/sleep (Dmitry). Also, update power supplies according to
  bindings; 
- (patch 4/6): pick up tags (Konrad,Dmitry);
- (patch 6/6): squash hall sensor node into gpio-keys (Dmitry);
- Link to v1: https://lore.kernel.org/r/20260308-rimob-new-features-v1-0-aa2c330572c0@xxxxxxxxxxxxxx

---
Cristian Cozzolino (6):
      dt-bindings: display: panel: Add Novatek NT35532 LCD DSI
      drm/panel: Add driver for Novatek NT35532
      arm64: dts: qcom: msm8953-flipkart-rimob: Enable display and GPU
      arm64: dts: qcom: msm8953-flipkart-rimob: Enable WiFi/Bluetooth
      arm64: dts: qcom: msm8953-flipkart-rimob: Enable touchscreen
      arm64: dts: qcom: msm8953-flipkart-rimob: Enable Hall sensor

 .../bindings/display/panel/novatek,nt35532.yaml    |  80 +++
 MAINTAINERS                                        |   6 +
 .../arm64/boot/dts/qcom/msm8953-flipkart-rimob.dts | 139 +++-
 drivers/gpu/drm/panel/Kconfig                      |  11 +
 drivers/gpu/drm/panel/Makefile                     |   1 +
 drivers/gpu/drm/panel/panel-novatek-nt35532.c      | 779 +++++++++++++++++++++
 6 files changed, 1015 insertions(+), 1 deletion(-)
---
base-commit: 8e5a478b6d6a5bb0a3d52147862b15e4d826af19
change-id: 20260303-rimob-new-features-037944b3a620

Best regards,
-- 
Cristian Cozzolino <cristian_ci@xxxxxxxxxxxxxx>