Re: [PATCH 2/3] arm64: dts: freescale: add initial device tree for TQMa93xx/MBa93xxLA-MINI

From: Andrew Lunn

Date: Wed Mar 18 2026 - 11:16:44 EST

On Tue, Mar 17, 2026 at 12:17:01PM +0100, Alexander Stein wrote:
> + mdio {
> + compatible = "snps,dwmac-mdio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethphy_eqos: ethernet-phy@0 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_eqos_phy>;
> + interrupt-parent = <&gpio3>;
> + interrupts = <26 IRQ_TYPE_EDGE_FALLING>;

Hi Alexander

Haven't we been here before? EDGE interrupts are generally wrong for
PHYs.

> + reset-gpios = <&expander0 0 GPIO_ACTIVE_LOW>;
> + reset-assert-us = <500000>;
> + reset-deassert-us = <50000>;
> + enet-phy-lane-no-swap;
> + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
> + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
> + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> + ti,dp83867-rxctrl-strap-quirk;
> + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
> + };
> + };
> +};
> +
> +&fec {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_fec>;
> + phy-mode = "rgmii-id";
> + phy-handle = <&ethphy_fec>;
> + fsl,magic-packet;

Has WoL been tested?

Andrew